Which of the following services use TCP?
1. DHCP
2. SMTP
3. HTTP
4. TFTP
5. FTP
A. 1 and 2
B. 2, 3 and 5
C. 1, 2 and 4
D. 1, 3 and 4
Select an option to see the answer and solution.
What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model?
A. Application
B. Host-to-Host
C. Internet
D. Network Access
Select an option to see the answer and solution.
Which of the following describe the DHCP Discover message?
1. It uses FF:FF:FF:FF:FF:FF as a layer 2 broadcast.
2. It uses UDP as the Transport layer protocol.
3. It uses TCP as the Transport layer protocol.
4. It does not use a layer 2 destination address.
A. 1 only
B. 1 and 2
C. 3 and 4
D. 4 only
Select an option to see the answer and solution.
You want to implement a mechanism that automates the IP configuration, including IP address, subnet mask, default gateway, and DNS information. Which protocol will you use to accomplish this?
Select an option to see the answer and solution.
Which of the following is private IP address?
A. 12.0.0.1
B. 168.172.19.39
C. 172.15.14.36
D. 192.168.24.43
Select an option to see the answer and solution.
Which of the following allows a router to respond to an ARP request that is intended for a remote host?
A. Gateway DP
B. Reverse ARP (RARP)
C. Proxy ARP
D. Inverse ARP (IARP)
Select an option to see the answer and solution.
The DoD model (also called the TCP/IP stack) has four layers. Which layer of the DoD model is equivalent to the Network layer of the OSI model?
A. Application
B. Host-to-Host
C. Internet
D. Network Access
Select an option to see the answer and solution.
Which of the following services use UDP?
1. DHCP
2. SMTP
3. SNMP
4. FTP
5. HTTP
6. TFTP
A. 1, 3 and 6
B. 2 and 4
C. 1, 2 and 4
D. All of the above
Select an option to see the answer and solution.
Which class of IP address provides a maximum of only 254 host addresses per network ID?
A. Class A
B. Class B
C. Class C
D. Class D
Select an option to see the answer and solution.
If you use either Telnet or FTP, which is the highest layer you are using to transmit data?
A. Application
B. Presentation
C. Session
D. Transport
Select an option to see the answer and solution.
Which of the following is the decimal and hexadecimal equivalents of the binary number 10011101?
A. 155, 0x9B
B. 157, 0x9D
C. 159, 0x9F
D. 185, 0xB9
Select an option to see the answer and solution.
Which statements are true regarding ICMP packets?
1. They acknowledge receipt of a TCP segment.
2. They guarantee datagram delivery.
3. They can provide hosts with information about network problems.
4. They are encapsulated within IP datagrams.
A. 1 only
B. 2 and 3
C. 3 and 4
D. 2, 3 and 4
Select an option to see the answer and solution.
Which of the following are layers in the TCP/IP model?
1. Application
2. Session
3. Transport
4. Internet
5. Data Link
6. Physical
A. 1 and 2
B. 1, 3 and 4
C. 2, 3 and 5
D. 3, 4 and 5
Select an option to see the answer and solution.
Which layer 4 protocol is used for a Telnet connection?
Select an option to see the answer and solution.
Which statements are true regarding ICMP packets?
1. ICMP guarantees datagram delivery.
2. ICMP can provide hosts with information about network problems.
3. ICMP is encapsulated within IP datagrams.
4. ICMP is encapsulated within UDP datagrams.
A. 1 only
B. 2 and 3
C. 1 and 4
D. All of the above
Select an option to see the answer and solution.
Which of the following are TCP/IP protocols used at the Application layer of the OSI model?
1. IP
2. TCP
3. Telnet
4. FTP
5. TFTP
A. 1 and 3
B. 1, 3 and 5
C. 3, 4 and 5
D. All of the above
Select an option to see the answer and solution.
What protocol is used to find the hardware address of a local device?
Select an option to see the answer and solution.
Which of the following protocols uses both TCP and UDP?
Select an option to see the answer and solution.
What is the address range of a Class B network address in binary?
A. 01xxxxxx
B. 0xxxxxxx
C. 10xxxxxx
D. 110xxxxx
Select an option to see the answer and solution.