If a carrier wave of 1000 kHz is used to carry the signal, the length of transmitting antenna will be equal to ________.
A. 300 m
B. 30 m
C. 3 m
D. 0.3 m
Select an option to see the answer and solution.
Waves that are required for long distance wireless communication are
A. Infrared rays
B. Ultraviolet rays
C. Radio waves
D. Microwaves
Select an option to see the answer and solution.
A television channel is characterised by
A. Frequency of transmitted signal
B. Velocity of transmitted signal
C. Physical dimension of television screen
D. Size of picture tube
Select an option to see the answer and solution.
What is found in frequency modulation ?
A. Fixed frequency
B. Fixed dimension
C. Change in frequency and dimension
D. Change in dimension only
Select an option to see the answer and solution.
Positive feedback is used in
A. Amplifiers
B. Rectifiers
C. Oscillators
D. None of these
Select an option to see the answer and solution.
The waveform of a certain signal can be studied by
A. Spectrometer
B. Cathode ray oscilloscope
C. P – n junction diode
D. Sonometer
Select an option to see the answer and solution.
The GPS device in an automobile uses which communication channel?
A. Satellite
B. Microwave
C. Radio frequency
D. Infrared
Select an option to see the answer and solution.
In a optical fibre cable, the signal is propagated along the
A. Inner Core
B. Cladding
C. Both core and cladding
D. Surface and cladding
Select an option to see the answer and solution.
The audio signals of TV are
A. Amplitude modulated
B. Frequency modulated
C. Unmodulated
D. Velocity modulated
Select an option to see the answer and solution.
In radio-communication, the signals emitted by transmitting antenna are reflected on
A. Stratosphere
B. Ozonosphere
C. Ionosphere
D. Troposphere
Select an option to see the answer and solution.
Quality of transmission depends upon
A. Nature of signal only
B. Nature of medium only
C. Both (A) and (B)
D. Neither A nor B
Select an option to see the answer and solution.
Circuit breaker usually operate under
A. After D. C. component has ceased
B. Transient state of short-circuit current
C. Sub-transient state of short-circuit current
D. Steady state of short-circuit current
Select an option to see the answer and solution.
The resistance of the human body (dry condition) is of the order of
A. 101 Ohm
B. 102 Ohm
C. 103 Ohm
D. None of these
Select an option to see the answer and solution.
Which component of an IED creates an electrical charge?
A. Activator
B. Fuse
C. Explosive
D. Power source
Select an option to see the answer and solution.
A multimeter is used to measure
A. Current
B. Voltage
C. Resistance
D. All of the above
Select an option to see the answer and solution.
Which of the following was the first theory of superconductivity?
A. Ginzburg Landau theory
B. London theory
C. Resonating valence bond theory
D. Quantum field theory
Select an option to see the answer and solution.
A wire of copper having length I and area of cross-section A is taken and a current i is flown through it. The power dissipated in the wire is P. If we take an aluminium wire having same dimensions and pass the same current through it, the power dissipated will be
Select an option to see the answer and solution.
A wire carrying current is
A. Positively charged
B. Negatively charged
C. Neutral
D. Charged with a type depending upon current strength
Select an option to see the answer and solution.
Carbon Arc lamps are commonly used in
A. Cinema projectors
B. Photography
C. Vehicles
D. Domestic lighting
Select an option to see the answer and solution.
Low voltage cables are meant for use up to
A. 3.3 kV
B. 1.1 kV
C. 11 kV
D. 0.5 kV
Select an option to see the answer and solution.