Oil produced by solvent extraction
A. Has low free fatty acid content
B. Is odourless
C. Both A & B
D. Neither A nor B
Select an option to see the answer and solution.
Conversion of SO2 to SO3 in Monsanto-4 pass converter is about __________ percent.
Select an option to see the answer and solution.
L.D. converter is used in the production of
A. Pig iron
B. Steel
C. Copper
D. Zinc
Select an option to see the answer and solution.
90% of the caprolactum is converted to nylon-6 on its condensation polymerisation in the reactor maintained at __________ °C.
A. -5
B. 10 - 30
C. 250 - 280
D. 500 - 600
Select an option to see the answer and solution.
Setting of plaster of paris is accompanied with
A. Hydration
B. Dehydration
C. Hydrolysis
D. Loss of CO2
Select an option to see the answer and solution.
With increase in temperature, the equilibrium constant at constant pressure (Kp) for oxidation of sulphur dioxide
A. Increases
B. Increases linearly
C. Decreases
D. Decreases linearly
Select an option to see the answer and solution.
Hydrazine is used in water treatment for the removal of
A. Colloidal impurities
B. Dissolved oxygen
C. Turbidity
D. Chlorinous taste
Select an option to see the answer and solution.
Very dilute solutions are generally used in fermentation reactions for which the optimum temperature range is __________ °C.
A. -5 to 0
B. 5 to 10
C. 30 to 50
D. 75 to 80
Select an option to see the answer and solution.
Chloramines are used in water treatment for
A. Disinfection and control of taste & odour
B. Corrosion control
C. Removing turbidity
D. Control of bacteria
Select an option to see the answer and solution.
Pick out the endothermic reaction out of the following.
A. C + 2 1 O2 = CO
B. CO + 3H2 = CH4 + H2 O
C. CaCO3 = CaO + CO2
D. CO + 2 1 O2 = CO2
Select an option to see the answer and solution.
Pick out the exothermic reaction out of the following:
A. C + H2 O = CO + H2
B. CaC2 + H2 O = Ca(OH)2 + C2 H2
C. MgCO3 = MgO + CO2
D. All of the above
Select an option to see the answer and solution.
Grignard reagent is chemically known as
A. Ethyl magnesium chloride
B. Methyl magnesium chloride
C. Dichlorophenol
D. Monochloro acetic acid
Select an option to see the answer and solution.
Out of the following processes of paper pulp manufacture, the maximum corrosion problem in digestion & handling equipments is encountered in the __________ process.
A. Mechanical
B. Sulphate/kraft
C. Sulphite
D. Neutral sulphite semi-chemical
Select an option to see the answer and solution.
Styrene butadiene rubber (SBR) is
A. A natural rubber
B. A synthetic polymer
C. A synthetic monomer
D. Another name of silicone rubber
Select an option to see the answer and solution.
Starting material for the production of styrene butadiene rubber (SBR) is
A. Ethyl alcohol
B. Ethylene
C. Both A & B
D. Neither A nor B
Select an option to see the answer and solution.
Permanent hardness of water is due to the presence of calcium & magnesium
A. Bi-carbonates
B. Sulphates & chlorides
C. Carbonate
D. None of these
Select an option to see the answer and solution.
Riboflavin is a/an
A. Vitamin
B. Analgesic drug
C. Anaesthetics
D. Anti-malarial drug
Select an option to see the answer and solution.
Yellow glycerine is made into white, using
A. Activated carbon
B. Diatomaceous earth
C. Bauxite
D. Bentonite
Select an option to see the answer and solution.
Percentage of glycerene present in the spent lye obtained during soap manufacture is about
Select an option to see the answer and solution.
Gun powder, which is an explosive comprises of charcoal, sulphur and
A. Glycerene
B. Salt petre
C. Nitro glycerene
D. Dynamite
Select an option to see the answer and solution.