A flip-flop can store:
A. 1 bits of data
B. 2 bits of data
C. 3 bits of data
D. 4 bits of data
E. None of the above
Select an option to see the answer and solution.
A logic circuit which is used to change a BCD number into an equivalent decimal number is
A. decoder
B. encoder
C. multiplexer
D. code converter
E. None of the above
Select an option to see the answer and solution.
Cyclic codes are used in
A. data transfer
B. continuously varying signal representation
C. arithmetic and logical computation
D. All of the above
E. None of the above
Select an option to see the answer and solution.
The digits used in a binary number system are _____ and _____
A. 9 and 0
B. 0 and 1
C. 1 and 2
D. 3 and 4
E. None of the above
Select an option to see the answer and solution.
The 2-input XOR gate has a high output only when the input bits are _____
A. even
B. different
C. low
D. high
E. None of the above
Select an option to see the answer and solution.
Conversion of binary number 10010102 to to its decimal number is
A. 7410
B. 9710
C. 7210
D. 6310
E. None of the above
Select an option to see the answer and solution.
A combinational logic circuit which generates particular binary word or number is
A. decoder
B. multiplexer
C. encoder
D. demultiplexer
E. None of the above
Select an option to see the answer and solution.
The 1's compliment of binary number 11010 is:
A. 101
B. 10
C. 110
D. 11101
E. None of the above
Select an option to see the answer and solution.
Conversion of binary number 1100002 to hexadecimal is
A. 3016
B. 4016
C. 4316
D. 2716
E. None of the above
Select an option to see the answer and solution.
Conversion of an octal number 1068 to binary number is
A. 11100102
B. 10001102
C. 11001102
D. 100001102
E. None of the above
Select an option to see the answer and solution.
Conversion of binary number 1000112 to an octal number is
A. 438
B. 478
C. 498
D. 508
E. None of the above
Select an option to see the answer and solution.
What table shows the electrical state of a digital circuit's output for every possible combination of electrical states in the inputs?
A. Function table
B. Truth table
C. Routing table
D. ASCII table
E. None of the above
Select an option to see the answer and solution.
What is the hexadecimal equivalent of a binary number 10101111
A. AF
B. 9E
C. 8C
D. All of the above
E. None of the above
Select an option to see the answer and solution.
The two basic technologies for digital ICs are bipolar and MOS. Bipolar technology is preferred for_____ and _____ whereas MOS technology is better suited to LSI.
A. SSI, MSI
B. MSI, LSI
C. SSI, LSI
D. ECL, DTL
E. None of the above
Select an option to see the answer and solution.
Small-scale integration, abbreviated _____ refers to fewer than 12 gates on the same chip. Medium-scale integration (MSI) means 12 to 100 gates per chip. And large-scale integration (LSI) refers to more than _____ gates per chip.
A. SSI, 75
B. SSI, 100
C. SSI, 1000
D. SSI, 10000
E. None of the above
Select an option to see the answer and solution.
How many outputs signals can a gate have?
A. one
B. more than one
C. two only
D. both (a) and (b)
E. None of the above
Select an option to see the answer and solution.
Conversion of an octal number 1258 to its decimal number is
A. 9010
B. 8510
C. 8710
D. 9910
E. None of the above
Select an option to see the answer and solution.
What is the main advantage of using MOSFET rather than bipolar transistor circuitary in ICs?
A. much greater complexity (more components) than bipolar circuits : better economy
B. higher operating speed than bipolar circuits
C. fewer power supply connections are required with MOS ICs
D. system designers are more familiar with MOS circuitary
E. None of the above
Select an option to see the answer and solution.
The term sum-of-products in boolean algebra means
A. The AND function of several OR functions
B. The OR function of several AND functions
C. The OR function of several OR functions
D. The AND function of several AND functions
E. None of the above
Select an option to see the answer and solution.
A shift register can be used for:
A. parallel to serial conversion
B. serial to parallel conversion
C. digital delay line
D. all of the above
E. None of the above
Select an option to see the answer and solution.