A square wave has a period of 60 µs. The first odd harmonic is
Select an option to see the answer and solution.
Electrical Engineering · all questionsAlternating Current And Voltage
Alternating Current And Voltage
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
37
Questions
2/2
Page
Pick an option on a question to see the right answer and solution.
Periodic is characterized by a repetition at fixed time intervals.
Select an option to see the answer and solution.
The designation rms means repetitions measured per second.
Select an option to see the answer and solution.
A saw-tooth wave has a period of 10 ms. Its frequency is
Select an option to see the answer and solution.
The average value of a 12 V peak sine wave over one complete cycle is
Select an option to see the answer and solution.
The duty cycle of a pulse waveform with a pulse width of 10 µs and a period of 100 µs is 25%.
Select an option to see the answer and solution.
If the rms voltage drop across a 15 kΩ resistor is 16 V, the peak current through the resistor is
Select an option to see the answer and solution.
The angular position of a phasor represents the angle of the sine wave with respect to a reference.
Select an option to see the answer and solution.
The unit of frequency is the hertz.
Select an option to see the answer and solution.
How many degrees are there in p/3 rad?
Select an option to see the answer and solution.
If the rms current through a 6.8 kΩ resistor is 8 mA, the rms voltage drop across the resistor is
Select an option to see the answer and solution.
If the rms current through a 4.7 kΩ resistor is 4 mA, the peak voltage drop across the resistor is
Select an option to see the answer and solution.
A pulse waveform has a high time of 8 ms and a pulse width of 32 ms. The duty cycle is
Select an option to see the answer and solution.
The length of a phasor represents the amplitude.
Select an option to see the answer and solution.
One sine wave has a positive-going zero crossing at 15° and another sine wave has a positive-going zero crossing at 55°. The phase angle between the two waveforms is
Select an option to see the answer and solution.
Duty cycle is the characteristic of a pulse waveform that indicates the high time versus the low time.
Select an option to see the answer and solution.
A 20 kHz pulse waveform consists of pulses that are 15 µs wide. The duty cycle
Select an option to see the answer and solution.