Resistance of a material always decreases if
Select an option to see the answer and solution.
The rating of a fuse wire is always expressed in
Select an option to see the answer and solution.
The minimum charge on an ion is
Select an option to see the answer and solution.
Current velocity through a copper conductor is
Select an option to see the answer and solution.
For which of the following 'ampere second' could be the unit?
Select an option to see the answer and solution.
An instrument which detects electric current is known as
Select an option to see the answer and solution.
It becomes more difficult to remove
Select an option to see the answer and solution.
Two resistances Rl and Ri are connected in series across the voltage source where Rl > Ri. The largest drop will be across
Select an option to see the answer and solution.
A closed switch has a resistance of
Select an option to see the answer and solution.
A 40 W bulb is connected in series with a room heater. If now 40 W bulb is replaced by 100 W bulb, the heater output will:
Select an option to see the answer and solution.
Which of the following materials has the least resistivity ?
Select an option to see the answer and solution.
Three 60 W bulbs are in parallel across the 60 V power line. If one bulb burns open
Select an option to see the answer and solution.
Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as
Select an option to see the answer and solution.
For testing appliances, the wattage of test lamp should be
Select an option to see the answer and solution.
A rheostat differs from potentiometer in the respect that it
Select an option to see the answer and solution.
Are the materials having electrical conductivity much less than most of the metals but much greater than that of typical insulators.
Select an option to see the answer and solution.
In a series circuit with unequal resistances
Select an option to see the answer and solution.
The resistance of a conductor varies inversely as
Select an option to see the answer and solution.
A resistance having rating 10 ohms, 10 W is likely to be a
Select an option to see the answer and solution.
If the efficiency of a machine is to be high, what should be low?
Select an option to see the answer and solution.