In a D.C. machine, the value of peripheral speed should not, normally, exceed
Select an option to see the answer and solution.
A moving-coil permanent-magnet instrument can be used as _____ by using a low resistance shunt.
Select an option to see the answer and solution.
Volt box is a component to
Select an option to see the answer and solution.
For measuring current at high frequency we should use
Select an option to see the answer and solution.
In an AC co-ordinate potentiometer, the currents in the phase and quadrature potentiometer are adjusted to be
Select an option to see the answer and solution.
The adjustment of position of shading bands, in an energy meter is done to provide
Select an option to see the answer and solution.
A multirangq instrument has
Select an option to see the answer and solution.
Which of the following are integrating instruments ?
Select an option to see the answer and solution.
The use of _____ instruments is merely confined within laboratories as standardizing instruments.
Select an option to see the answer and solution.
In a low power factor wattmeter the pressure coil is connected
Select an option to see the answer and solution.
Materials exhibiting zero value of resistivity are known as ______ .
Select an option to see the answer and solution.
Disc windings are primarily used in
Select an option to see the answer and solution.
Resistances can be measured with the help of
Select an option to see the answer and solution.
If an inductance is connected in one arm of bridge and resistances in the remaining three arms
Select an option to see the answer and solution.
A sensitive galvanometer produces large deflection for a
Select an option to see the answer and solution.
Alternating current is measured by
Select an option to see the answer and solution.
A universal RLC bridge uses
Select an option to see the answer and solution.
Is an instrument which measures the insulation resistance of an electric circuit relative to earth and one another,
Select an option to see the answer and solution.
are always double layer type.
Select an option to see the answer and solution.
The mcrease in heat dissipation by air blasts is due to increase in
Select an option to see the answer and solution.