1 db corresponds to ___________ change in power level
Select an option to see the answer and solution.
Electrical Engineering · all questionsMultistage Transistor Amplifiers
Multistage Transistor Amplifiers
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
37
Questions
2/2
Page
Pick an option on a question to see the right answer and solution.
An amplifier receives 0.1 W of input signal and delivers 15 W of signal power. What is the power gain in db?
Select an option to see the answer and solution.
The final stage of a multistage amplifier uses ___________
Select an option to see the answer and solution.
In obtaining the frequency response curve of an amplifier, the ___________
Select an option to see the answer and solution.
If a three-stage amplifier has individual stage gains of 10 db, 5 db and 12 db, then total gain in db is ___________
Select an option to see the answer and solution.
In RC coupling, the value of coupling capacitor is about ___________
Select an option to see the answer and solution.
The ear is not sensitive to ___________
Select an option to see the answer and solution.
RC coupling is generally confined to low power applications because of
Select an option to see the answer and solution.
___________ coupling provides the maximum voltage gain
Select an option to see the answer and solution.
The output of a microphone is rated at -52 db. The reference level is 1V under specified conditions. What is the output voltage of this microphone under the same sound conditions?
Select an option to see the answer and solution.
The bandwidth of a single stage amplifier is ___________ that of a multistage amplifier
Select an option to see the answer and solution.
Transformer coupling is generally employed when load resistance is
Select an option to see the answer and solution.
The purpose of RC or transformer coupling is to ___________
Select an option to see the answer and solution.
The frequency response of transformer coupling is ___________
Select an option to see the answer and solution.
In transistor amplifiers, we use ___________ transformer for impedance matching
Select an option to see the answer and solution.
The total gain of a multistage amplifier is less than the product of the gains of individual stages due to ___________
Select an option to see the answer and solution.
In practice, voltage gain is expressed ___________
Select an option to see the answer and solution.