Vidyalelo
Electrical Engineering · all questions

Series Parallel Circuits
practice.

Practice every MCQ with options. Use Show answers when you want the correct option and solution.

29

Questions

2/2

Page

Pick an option on a question to see the right answer and solution.

The parallel combination of a 470 Ω resistor and a 1.2 kΩ resistor is in series with the parallel combination of three 3 kΩ resistors. A 200 V source is connected across the circuit. The resistor with the most current has a value of

Select an option to see the answer and solution.

A Wheatstone bridge consists of four resistors in parallel.

Select an option to see the answer and solution.

In a certain five-step R/2R ladder network, the smallest resistor value is 1 kΩ. The largest value is

Select an option to see the answer and solution.

A balanced Wheatstone bridge consists of an RV of 3,500 Ω, an R2 of 200 Ω, and an R3 of 680 Ω. The value of RUNK is

Select an option to see the answer and solution.

The higher the range setting, the less the internal resistance and the greater the load effect of the voltmeter on a circuit.

Select an option to see the answer and solution.

A 12 kΩ resistor, a 15 kΩ resistor, and a 22 kΩ resistor are in series with two 10 kΩ resistors that are in parallel. The source voltage is 75 V. Current through the 15 kΩ resistor is approximately

Select an option to see the answer and solution.

A voltage divider consists of two 68 kΩ resistors and a 24 V source. The unknown output voltage is

Select an option to see the answer and solution.

A smaller-value load resistor will cause the output voltage to change more than a larger-value one.

Select an option to see the answer and solution.

A galvanometer is a meter that measures small amounts of voltage.

Select an option to see the answer and solution.