The aspect ratio (expressed in percentage) of the tyre is defined as the ratio of
Select an option to see the answer and solution.
Mechanical Engineering · all questionsAutomobile Engineering
Automobile Engineering
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
282
Questions
5/15
Page
Pick an option on a question to see the right answer and solution.
The composition of the electrolyte in a fully charged battery is that
Select an option to see the answer and solution.
The instrument used to check specific gravity of acid in a battery is
Select an option to see the answer and solution.
The size of engine cylinder is referred in terms of its
Select an option to see the answer and solution.
Clutch facings are usually attached to the plate by
Select an option to see the answer and solution.
When the brake pedal free play is less than the specified value, then the
Select an option to see the answer and solution.
A petrol engine of a car develops 125 Nm torque at 2700 r.p.m. The car is driven in second gear having gear ratio of 1.75. The final drive ratio is 4.11. If the overall transmission efficiency is 90%, then the torque available at the driving wheels is
Select an option to see the answer and solution.
For the same maximum pressure and temperature
Select an option to see the answer and solution.
The engine oil is stored in _________ when the engine is not running.
Select an option to see the answer and solution.
The major purpose of an electronically controlled automatic transmission is that this type of transmission
Select an option to see the answer and solution.
The basic purpose of providing caster angle on wheels is to
Select an option to see the answer and solution.
The coefficient of rolling resistance for a truck weighing 63,500 N is 0.018. The rolling resistance to the truck is
Select an option to see the answer and solution.
Instead of valves, the ports are used in case of
Select an option to see the answer and solution.
An overinflated tyre will wear the tread most near the
Select an option to see the answer and solution.
The connecting rods are generally made of __________ shaped cross-section.
Select an option to see the answer and solution.
The problems caused by the wheel imbalance are
Select an option to see the answer and solution.
The compression ratio in petrol engine is kept less than in Diesel engine because
Select an option to see the answer and solution.
In a Diesel engine, the function of a fuel injector is to
Select an option to see the answer and solution.
If the air-fuel mixture in a spark ignition engine is too rich, then air-fuel ratio is about
Select an option to see the answer and solution.
Q100
Open questionThe service brakes employed in cars are generally operated
Select an option to see the answer and solution.