When creating an isometric drawing in Auto-CAD the drafter can utilize the Dynamic Input and Polar Coordinate system to place both vertical and horizontal lines. A line created from one point 3 inches at 180 degrees would be a ________ line.
A. Horizontal
B. Vertical
C. Inclined
D. None of the above
Select an option to see the answer and solution.
The type of line that projects from an object for the express purpose of locating a dimension is a ________ line.
A. Visible
B. Hidden
C. Extension
D. Dimension
Select an option to see the answer and solution.
This is the measured size of a finished part:
A. Actual size
B. Dimensioned size
C. Production size
D. Basic size
Select an option to see the answer and solution.
Drafters should use a ________ in a section view of a mechanical part that includes the cylindrical view of a threaded hole.
A. Center line
B. Hatch line
C. Poly line
D. Dimension line
Select an option to see the answer and solution.
A ________ section allows the drafter to create a Cutting Plane line which is not in a straight line across the part.
A. Offset
B. Half
C. Whole
D. Broken out
Select an option to see the answer and solution.
Lines of an isometric drawing that are not parallel to the isometric axes are called this:
A. Trimetric lines
B. Non-isometric lines
C. Multiview lines
D. Dimetric lines
Select an option to see the answer and solution.
This type of section is limited by a break line:
A. Removed section
B. Revolved section
C. Broken-out section
D. Half section
Select an option to see the answer and solution.
Isometric drawings are often used by ________ to help illustrate complex designs.
A. Mechanical engineers
B. Piping drafters
C. Aerospace engineers
D. All of the above
Select an option to see the answer and solution.
When creating a Cutting Plane line with Auto-CAD it is customary to use a ________ to create the line.
A. Center line
B. Polyline
C. Dashed line
D. Hatch line
Select an option to see the answer and solution.
How can the drafter prevent Auto-CAD from placing or stacking another center mark on a circle when adding a diameter dimension to it?
A. Explode the dimension and then erase the center mark
B. Use the Properties dialog box to turn off the center mark of the dimension
C. It can't be done
D. Use the trim tool to take away the stacked center mark
Select an option to see the answer and solution.
If designs require changes, they should be documented with:
A. Development plans
B. Product proposals
C. Document reviews
D. Engineering change orders
Select an option to see the answer and solution.
Some of the common terms used to describe technical drawing include:
A. Drafting
B. Engineering Graphics
C. Engineering Drawing
D. All of the above
Select an option to see the answer and solution.
In U.S. structural and architectural drafting, all dimensions of this length are usually expressed in feet and inches:
A. One inch or over
B. One foot or over
C. One yard or over
D. One rod or over
Select an option to see the answer and solution.
This type of structural steel drawing shows all dimensions necessary for fabrication:
A. Shop drawings
B. Design drawings
C. Weldment drawings
D. Application drawings
Select an option to see the answer and solution.
These maps are used in planning installations of trees, shrubbery, drives, and other garden features:
A. Landscape maps
B. Engineering maps
C. Topographic maps
D. Cadastral maps
Select an option to see the answer and solution.
This is the term for the range of tightness or looseness resulting from the allowances and tolerances in mating parts:
A. Limits
B. Fit
C. Specifications
D. Allowance
Select an option to see the answer and solution.
The offset distance for the width (front to back) distance of the auxiliary view is the same distance of the ________ in the top view.
A. Width
B. Height
C. Length
D. None of the above
Select an option to see the answer and solution.
Schematic and single-line diagrams should be arranged so that signal or transmission path from input to output proceeds in this fashion:
A. Right to left and top to bottom
B. Right to left and bottom to top
C. Left to right and top to bottom
D. Left to right and bottom to top
Select an option to see the answer and solution.
A line drawn with a long section, short dash and another long section is a __________.
A. Hidden feature
B. Center of a circle
C. Center axis of a hidden cylinder
D. Center of a radius
Select an option to see the answer and solution.
An Auto-CAD term that refers to a pre-drawn object which is stored in a drawing file and can be inserted into any other drawing file as needed is a __________.
A. Block
B. Brick
C. Balloon
D. None of the above
Select an option to see the answer and solution.
