Q321
Open questionThe material used for brake lining should have __________ coefficient of friction.
Select an option to see the answer and solution.
Mechanical Engineering · all questionsMachine Design
Machine Design
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
605
Questions
17/31
Page
Pick an option on a question to see the right answer and solution.
Q322
Open questionForm coefficient of spring is
Select an option to see the answer and solution.
Q323
Open questionThe piston pin bearings in heavy duty diesel engines are
Select an option to see the answer and solution.
Q324
Open questionA locking device extensively used in automobile industry is a
Select an option to see the answer and solution.
Q325
Open questionThe design calculations for members subject to fluctuating loads with the same factor of safety, yield the most conservative estimates when using
Select an option to see the answer and solution.
Q326
Open questionCreep in belt is due to
Select an option to see the answer and solution.
Q327
Open questionThe spring mostly used in gramophones is
Select an option to see the answer and solution.
Q328
Open questionIn designing a connecting rod, it is considered like __________ for buckling about X-axis.
Select an option to see the answer and solution.
Q329
Open questionIn designing a connecting rod, it is considered like __________ for buckling about Y-axis.
Select an option to see the answer and solution.
Q330
Open questionTensile strength of a mild steel specimen can be roughly predicted from following hardness test
Select an option to see the answer and solution.
Q331
Open questionWhich of the following statement is correct regarding power screws?
Select an option to see the answer and solution.
Q332
Open questionA locking device extensively used in marine type connecting rod ends is a
Select an option to see the answer and solution.
Q333
Open questionA connecting rod should be
Select an option to see the answer and solution.
Q334
Open questionA screw is said to be over hauling screw, if the
Select an option to see the answer and solution.
Q335
Open questionWhen a nut is tightened by placing a washer below it, the bolt will be subjected to following type of loads
Select an option to see the answer and solution.
Q336
Open questionIn order to permit the thermal expansion/contraction of tubing, it should be
Select an option to see the answer and solution.
Q337
Open questionThe rolling contact bearings are known as
Select an option to see the answer and solution.
Q338
Open questionDeep groove ball bearings are used for
Select an option to see the answer and solution.
Q339
Open questionA compound cylinder with inner radius 50 mm and outer radius 70 mm is made by shrinking one cylinder on to the other cylinder, the junction radius is 60 mm and the junction pressure is 1.1 N/mm2. The maximum hoop stress developed in the inner cylinder is
Select an option to see the answer and solution.
Q340
Open questionA backing ring is used inside the pipe joint when making a
Select an option to see the answer and solution.