The draught in locomotive boilers is produced by a
Select an option to see the answer and solution.
Mechanical Engineering · all questionsSteam Boilers, Engines, Nozzles And Turbines
Steam Boilers, Engines, Nozzles And Turbines
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
489
Questions
3/25
Page
Pick an option on a question to see the right answer and solution.
The function of a cross-head is to guide motion of the _________ and to prevent it from bending.
Select an option to see the answer and solution.
1 kg.m is equal to
Select an option to see the answer and solution.
The working pressure range for a LaMont boiler is
Select an option to see the answer and solution.
By compounding the expansion of steam in two or more cylinders, the length of stroke
Select an option to see the answer and solution.
A device used to put off fire in the furnace of the boiler when the level of water in the boiler falls to an unsafe limit, is called
Select an option to see the answer and solution.
The function of a flywheel is
Select an option to see the answer and solution.
Ultimate analysis of fuel is determination of percentage of
Select an option to see the answer and solution.
Proximate analysis of fuel is determination of percentage of
Select an option to see the answer and solution.
A single stage impulse turbine with a diameter of 1.2 m runs at 3000 r.p.m. If the blade speed ratio is 0.42, then the inlet velocity of steam will be
Select an option to see the answer and solution.
In a 50% reaction turbine stage, tangential component of absolute velocity at rotor inlet is 537 m/s and the blade velocity is 454 m/s. The power output in kW of steam will be
Select an option to see the answer and solution.
A compound steam engine in which piston rods of high pressure and low pressure cylinders are attached to two different cranks set at 90° to each other, is called
Select an option to see the answer and solution.
A compound steam engine in which piston rods of high pressure and low pressure cylinder's are attached to two different cranks set at 180° to each other, is called
Select an option to see the answer and solution.
The temperature of flue gases at air heater outlet should be
Select an option to see the answer and solution.
The blade friction in the impulse turbine reduces the velocity of steam by __________ while it passes over the blades.
Select an option to see the answer and solution.
In a reaction turbine
Select an option to see the answer and solution.
The isentropic enthalpy drop in moving blade is two-third of the isentropic enthalpy drop in fixed blades of a turbine. The degree of reaction will be
Select an option to see the answer and solution.
The critical pressure ratio for initially superheated steam is __________ as compared to initially dry saturated steam.
Select an option to see the answer and solution.
In turbines, the fluid undergoes a continuous steady flow process and the speed of flow is
Select an option to see the answer and solution.
Expanding steam to a very low pressure (high vacuum) in steam engines is
Select an option to see the answer and solution.