Q361
Open questionShear strength of the welded joint for double parallel fillet is (where = Allowable shear stress for weld metal)
Select an option to see the answer and solution.
Mechanical Engineering · all questionsStrength Of Materials
Strength Of Materials
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
445
Questions
19/23
Page
Pick an option on a question to see the right answer and solution.
Q362
Open questionThe tensile strength of the welded joint for double fillet is (where s = Leg or size of the weld, = Length of weld and = Allowable tensile stress for weld metal)
Select an option to see the answer and solution.
Q363
Open questionA thin cylindrical shell of diameter (d), length () and thickness (t) is subjected to an internal pressure (p). The hoop stress in the shell is
Select an option to see the answer and solution.
Q364
Open questionA thin cylindrical shell of diameter (d) length () and thickness (t) is subjected to an internal pressure (p). The longitudinal stress in the shell is
Select an option to see the answer and solution.
Q365
Open questionShear modulus is the ratio of
Select an option to see the answer and solution.
Q366
Open questionModular ratio of the two materials is the ratio of
Select an option to see the answer and solution.
Q367
Open questionModular ratio of two materials is the ratio of
Select an option to see the answer and solution.
Q368
Open questionIf the radius of wire stretched by a load is doubled, then its Young’s modulus will be
Select an option to see the answer and solution.
Q369
Open questionFor which material the Poisson's ratio is more than unity
Select an option to see the answer and solution.
Q370
Open questionThe value of modulus of elasticity for mild steel is of the order of
Select an option to see the answer and solution.
Q371
Open questionTrue stress strain-curve for materials is plotted between
Select an option to see the answer and solution.
Q372
Open questionWhen the shear force diagram is a parabolic curve between two points, it indicates that there is a
Select an option to see the answer and solution.
Q373
Open questionWhen there is a sudden increase or decrease in shear force diagram between any two points, it indicates that there is a
Select an option to see the answer and solution.
Q374
Open questionA bolt is made to pass through a tube and both of them are tightly fitted with the help of washers and nuts. If the nut is tightened, then
Select an option to see the answer and solution.
Q375
Open questionThe property of a material which allows it to be drawn into a smaller section is called
Select an option to see the answer and solution.
Q376
Open questionThe ratio of maximum shear stress developed in a rectangular beam and a circular beam of the same cross-sectional area is
Select an option to see the answer and solution.
Q377
Open questionThe pull required to tear off the plate per pitch length is (where p = Pitch of rivets, t = Thickness of plates and and = Permissible tensile, shearing and crushing stresses respectively)
Select an option to see the answer and solution.
Q378
Open questionThe torsional rigidity of a shaft is given by
Select an option to see the answer and solution.
Q379
Open questionWhen a shaft, is subjected to torsion, the shear stress induced in the shaft varies from
Select an option to see the answer and solution.
Q380
Open questionA thin spherical shell of diameter (d) and thickness (t) is subjected to an internal pressure (p). The stress in the shell material is
Select an option to see the answer and solution.