The shear stress at the center of a circular shaft under torsion is
Select an option to see the answer and solution.
Mechanical Engineering · all questionsStrength Of Materials
Strength Of Materials
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
445
Questions
5/23
Page
Pick an option on a question to see the right answer and solution.
The ratio of change in volume to the original volume is called
Select an option to see the answer and solution.
In order to know whether a column is long or short, we must know its
Select an option to see the answer and solution.
The shear force and bending moment are zero at the free end of a cantilever beam, if it carries a
Select an option to see the answer and solution.
When a bar is cooled to -5°C, it will develop
Select an option to see the answer and solution.
If a part is constrained to move and heated, it will develop
Select an option to see the answer and solution.
The bending stress in abeam is __________ bending moment.
Select an option to see the answer and solution.
When shear force at a point is zero, then bending moment is _________ at that point.
Select an option to see the answer and solution.
For long columns, the value of buckling load is __________ crushing load.
Select an option to see the answer and solution.
In case of eccentrically loaded struts __________ is preferred.
Select an option to see the answer and solution.
The steel bars in a reinforced cement concrete beam are embedded __________ of the beam.
Select an option to see the answer and solution.
The rivets are used for _________ fastenings.
Select an option to see the answer and solution.
The tensile test is carried on __________ materials.
Select an option to see the answer and solution.
The compression test is carried on __________ materials.
Select an option to see the answer and solution.
A welded joint as compared to a riveted joint has __________ strength.
Select an option to see the answer and solution.
If the slenderness ratio for a column is 100, then it is said to be a _________ column.
Select an option to see the answer and solution.
Whenever a material is loaded within elastic limit, stress is __________ strain.
Select an option to see the answer and solution.
The neutral axis of a beam is subjected to __________ stress.
Select an option to see the answer and solution.
The product of Young's modulus (E) and moment of inertia (I) is known as
Select an option to see the answer and solution.
Q100
Open questionWhen a body is subjected to direct tensile stresses ( and ) in two mutually perpendicular directions, accompanied by a simple shear stress then in Mohr's circle method, the circle radius is taken as
Select an option to see the answer and solution.