In a cold chamber die casting machine
Select an option to see the answer and solution.
Mechanical Engineering · all questionsWorkshop Technology
Workshop Technology
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
206
Questions
5/11
Page
Pick an option on a question to see the right answer and solution.
Carburizing flame is used to weld
Select an option to see the answer and solution.
A progressive limit gauge has
Select an option to see the answer and solution.
The temperature at which the new grains are formed in the metal is called
Select an option to see the answer and solution.
The purpose of a gate is to
Select an option to see the answer and solution.
In order to check the clearance between two mating surfaces, a ________ gauge should be used.
Select an option to see the answer and solution.
In forehand welding, the angle between the welding rod and the work is kept as
Select an option to see the answer and solution.
In backhand welding, the angle between the welding torch and the work is kept as
Select an option to see the answer and solution.
In electric resistance welding, voltage required for heating is
Select an option to see the answer and solution.
To prevent the body of the blade from jamming in the saw cut, the teeth of blade are
Select an option to see the answer and solution.
In shielded arc welding
Select an option to see the answer and solution.
The cold chisels are made from
Select an option to see the answer and solution.
A three high rolling mill consists of three rolls placed one above the other. Which of the following statement is correct?
Select an option to see the answer and solution.
The maximum flame temperature occurs
Select an option to see the answer and solution.
The temperature produced by oxy-hydrogen flame is about
Select an option to see the answer and solution.
The instrument used to measure external and internal diameter of shafts, thickness of parts and depth of holes, is
Select an option to see the answer and solution.
According to Indian standards, the total numbers of tolerance grades are
Select an option to see the answer and solution.
Metal patterns are used for
Select an option to see the answer and solution.
The machining allowance provided on patterns depends upon
Select an option to see the answer and solution.
Q100
Open questionThe metal patterns as compared to wooden patterns require less
Select an option to see the answer and solution.