Which of the following petrographic constituents of coal is non-coking?
A. Vitrain
B. Clarain
C. Durain
D. Fussain
Select an option to see the answer and solution.
Match the following:
Group 1
Group 2
P. Blast furnace
1. Lime
Q. Rotary kiln
2. Pig iron
R. Continuous casting
3. Heat exchanger
S. stoves
4. Billets
A. P-2, Q-1, R-4, S-3
B. P-1, Q-2, R-3, S-4
C. P-4, Q-3, R-2, S-1
D. P-3, Q-4, R-1, S-2
Select an option to see the answer and solution.
The muffle furnace is
A. used for laboratory purpose to do the heat treatment of materials
B. Used to make steel
C. Used to make iron
D. Used to make coke
Select an option to see the answer and solution.
Pensky-Marten apparatus is used for those oils, whose flash points are . . . . . . . . °F.
A. < 90
B. < 120
C. 90 - 110
D. > 120
Select an option to see the answer and solution.
What is chemical formula of mullite
A. 3Al2 O3
B. SiO2
C. AlO3 .8SiO2
D. 3Al2 O3 .2SiO2
Select an option to see the answer and solution.
Which coal forms first during coalification process
A. peat
B. lignite
C. bituminous
D. anthracite
Select an option to see the answer and solution.
L.D. Converters are generally lined with
A. magnesite
B. fireclay
C. chrome magnesite
D. silica
Select an option to see the answer and solution.
Main constituents of benzol are
A. benzene, toluene & xylene
B. tar & creosote
C. anthracene & phenol
D. ammonia & phenol
Select an option to see the answer and solution.
Which is the correct option for highest and lowest grade of coal among given combination
A. lignite-Peat
B. Bituminous-lignite
C. Anthracite-Peat
D. Anthracite-Bituminous
Select an option to see the answer and solution.
The mini blast furnace is used for
A. Conventional route of iron making
B. Flux making
C. Making iron from inferior quality of ore
D. Both B and C
Select an option to see the answer and solution.
Hot gases from a furnace are entering at the base of a 30m high tubular vertical chimney at 600°C. The density of air and furnace gases at respective temperatures are 1.165 and 0.405 kgm-3 respectively. The static draft produced by the chimney is . . . . . . . . Pa.
A. 2.3
B. 22.8
C. 223.6
D. 2193.3
Select an option to see the answer and solution.
Refractories are materials which
A. withstand high temperature
B. Don't fuse at high temperature
C. High thermal resistivity
D. All are correct
Select an option to see the answer and solution.
The fusion temperature of Chromite brick is
A. 3050°C
B. 1780°C
C. 1900°C
D. 2050°C
Select an option to see the answer and solution.
Which of the following is /are neutral refractories
A. Dolomite refractory
B. Silica refractory
C. Carbon block refractory
D. None of these
Select an option to see the answer and solution.
Pick up correct statement about Bessemer converter
A. It is an oldest process of steel making
B. It is a converter used to make steel
C. Air is supplied to converter to oxidize the impurities
D. All are correct
Select an option to see the answer and solution.
Fixed carbon in coal is defined as
A. that present in volatile matters
B. the total quantity of carbon present in ash
C. hundred minus the percentage of volatile matter ash & moisture
D. the one which is present in the residue after ash formed
Select an option to see the answer and solution.
Arrange the following refractory materials in ascending order of their melting points.
P. Alumina
Q. Silica
R. Carbon
S. Zirconia
A. R > P > Q > S
B. S > R > Q > P
C. R > S > P > Q
D. P > S > R > Q
Select an option to see the answer and solution.
Which type of fuel is used to heat the Blast furnace stove
A. Blast furnace gas
B. Mixed gas
C. Electrical energy
D. Both A and B
Select an option to see the answer and solution.
Oxygen percentage (by weight) in atmospheric air is
Select an option to see the answer and solution.
Those refractories which are neither attacked acid slag nor by basic slags are called
A. Basic refractories
B. Acidic refractories
C. Neutral refractories
D. None of these
Select an option to see the answer and solution.