Which of the following components can be manufactured by powder metallurgy technique?
Select an option to see the answer and solution.
Metallurgical Engineering · all questionsPowder Metallurgy
Powder Metallurgy
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
50
Questions
1/3
Page
Pick an option on a question to see the right answer and solution.
Advantages of Casting are: (I) Can create complex part geometries, 3-D shapes (II) Can create both external and internal shapes and large hollow shapes (III) It is a near net shape process for small to large parts (IV) Very good mechanical strength can be obtained for as-cast component
Select an option to see the answer and solution.
During hot isostatic pressing of powder particulates, the pressure and temperatures are
Select an option to see the answer and solution.
Density in sintering product is improved by
Select an option to see the answer and solution.
In case of binary alloys, when the tangent touches plot for two phases, it means that at that composition, chemical potential of component A in both phases are
Select an option to see the answer and solution.
In ultrarapid solidification process of powder production, the rate of cooling is
Select an option to see the answer and solution.
Powder Metallurgy is the branch of metallurgy in which parts are produced by
Select an option to see the answer and solution.
The statement of sintering "The thermal treatment of a powder or compact, at a temperature below the melting point of the main constituent for the purpose of increasing its strength" is given by
Select an option to see the answer and solution.
During intermediate steps the pores are situated at the intersection of three or four
Select an option to see the answer and solution.
For random distribution of particle size, standard deviation is defined in such a way that:
Select an option to see the answer and solution.
Which of the following method is used to produce powder in powder metallurgy?
Select an option to see the answer and solution.
Vacuum atomization is also known as . . . . . . . .
Select an option to see the answer and solution.
The particle shape influences
Select an option to see the answer and solution.
Pick best answer for following statements
Select an option to see the answer and solution.
Advantages of powder metallurgy are
Select an option to see the answer and solution.
Which of the following term can be used to describe a cemented carbide:
Select an option to see the answer and solution.
The sintering of powder particulates is completed in how many stages
Select an option to see the answer and solution.
Which of the following is (are) true regarding powder metallurgy?
1. Zero or minimal scrap
2. No secondary operation
3. Poor surface finish
4. High dimensional accuracy of components manufactured
1. Zero or minimal scrap
2. No secondary operation
3. Poor surface finish
4. High dimensional accuracy of components manufactured
Select an option to see the answer and solution.
The mass of the balls in vibratory ball mill
Select an option to see the answer and solution.
The process of infiltration in sintered products is to improve
Select an option to see the answer and solution.