Vidyalelo
Mining Engineering · all questions

Opencast Mining
practice.

Practice every MCQ with options. Use Show answers when you want the correct option and solution.

299

Questions

10/15

Page

Pick an option on a question to see the right answer and solution.

Now a days the wagon drills operated by

Select an option to see the answer and solution.

One of the secondary blasting technique is . . . . . . . .

Select an option to see the answer and solution.

The angle of slope from bench wall from the horizontal called

Select an option to see the answer and solution.

The following nomeneclature 20/90 for drag line is related to . . . . . . . .

Select an option to see the answer and solution.

This type of fuel not being washed to improve heat value.

Select an option to see the answer and solution.

Number of holes drilled by two persons is sandstone with a depth of 1.2 - 1.5 m.

Select an option to see the answer and solution.

The following excavator will be used for a bench height of 20 m to 30 m of soft rock formation.

Select an option to see the answer and solution.

Most suitable for ripping rocks and medium hard rocks below 5 hardness scale which are laminated and stratified is . . . . . . . .

Select an option to see the answer and solution.

The slope angle for hard and compact ground should not be more than

Select an option to see the answer and solution.

Which one of the following is not related to open cast mining.

Select an option to see the answer and solution.

Dipper shovels of smaller size upto 3.5 m3 are usually driven by . . . . . . . .

Select an option to see the answer and solution.

Triangular or wedge failure is due to

Select an option to see the answer and solution.

The application range of hydraulicking is mostly limited to . . . . . . . .

Select an option to see the answer and solution.

Good matching of load haul equipment the truck body to shovel bucket capacity ratio should be

Select an option to see the answer and solution.

Terrace cut is given with the help of

Select an option to see the answer and solution.

Some times Jack hammer mounted with

Select an option to see the answer and solution.

The machine employed for loading broken rock from a bench standing the floor of the bench is . . . . . . . .

Select an option to see the answer and solution.

Motions imparted by the wagon drill druing the time of drilling to the rods.

Select an option to see the answer and solution.

Spacing of holes in coal is (manual quarry).

Select an option to see the answer and solution.

Over burden and mineral excavated in long strips of few meters thick called as

Select an option to see the answer and solution.