A communications device that combines transmissions from several I/O devices into one line is a:
A. concentrator
B. modifier
C. multiplexer
D. full-duplex line
E. None of the above
Select an option to see the answer and solution.
The main difference between synchronous and asynchronous transmission is
A. the clocking is derived from the data in synchronous transmission
B. the clocking is mixed with the data in asynchronous transmission
C. the pulse height is different.
D. the bandwidth required is different
E. None of the above
Select an option to see the answer and solution.
ARP (Address Resolution Protocol) is
A. a TCP/IP protocol used to dynamically bind a high level IP Address to a low-level physical hardware address
B. a TCP/IP high level protocol for transferring files from one machine to another
C. a protocol used to monitor computers
D. a protocol that handles error and control messages
E. None of the above
Select an option to see the answer and solution.
Which of the following uses network address translation?
A. Routers
B. Network adapter drivers
C. Hubs
D. Windows 95
E. None of the above
Select an option to see the answer and solution.
The X.25 standard specifies a
A. technique for start-stop data
B. technique for dial access
C. DTE/DCE interface
D. data bit rate
E. None of the above
Select an option to see the answer and solution.
The most important part of a multiple DHCP configurations is to make sure you don't have which of the following in the different scopes? Select the best answer.
A. Duplicate addresses
B. Duplicate pools
C. Duplicate subnets
D. Duplicate default gateways
E. None of the above
Select an option to see the answer and solution.
When a group of computers is connected together in a small area without the help of telephone lines, it is called
A. Remote communication network (RCN)
B. Local area network(LAN)
C. Wide area network (WAN)
D. Value added network (VAN)
E. None of the above
Select an option to see the answer and solution.
The 802.5 standard implements a way for preventing collisions on the network. How are collisions prevented when using this standard?
A. CSMA/CD
B. Token passing
C. Collision detection
D. Time sharing
E. Switched repeaters
Select an option to see the answer and solution.
A communication network which is used by large organizations over regional, national or global area is called
A. LAN
B. WAN
C. MAN
D. Intranet
E. None of the above
Select an option to see the answer and solution.
Information systems with common hardware, software, and network standards that provide easy access for end users and their networked computer systems. Select the best fit for answer:
A. TCP/IP
B. Protocol
C. Open Systems
D. Internetwork processor
E. None of the above
Select an option to see the answer and solution.
Which of the following TCP/IP protocol is used for file transfer with minimal capability and minimal overhead?
A. RARP
B. FTP
C. TFTP
D. TELNET
E. None of the above
Select an option to see the answer and solution.
Terminals are required for
A. realtime, batch processing, and timesharing
B. realtime, timesharing, and distributed processing
C. realtime, distributed processing, and manager inquiry
D. realtime, timesharing, and message switching
E. None of the above
Select an option to see the answer and solution.
Sending a file from your personal computer's primary memory or disk to another computer is called
A. uploading
B. downloading
C. logging on
D. hang on
E. None of the above
Select an option to see the answer and solution.
Business meeting and conferences can be held by linking distantly located people through a computer network. Not only the participants exchange information but are able to see each other. What is it called?
A. Telemeeting
B. Telemailing
C. Teleconferencing
D. Teletalking
E. None of the above
Select an option to see the answer and solution.
What frequency range is used for microwave communications, satellite and radar?
A. Low Frequency : 30 kHz to 300 kHz
B. Medium Frequency : 300 kHz to 3 MHz
C. Super High Frequency : 3000 MHz to 30000 MHz
D. Extremely High Frequency :30,000 MHz
E. None of the above
Select an option to see the answer and solution.
Which of the following statements is incorrect?
A. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission
B. Half-duplex line is a communication line in which data can move in two directions, but not at the same time.
C. Teleprocessing combines telecommunications and DP techniques in online activities.
D. Batch processing is the preferred processing mode for telecommunication operations
E. None of the above
Select an option to see the answer and solution.
If the ASCII character H is sent and the character I is received, what type of error is this?
A. single-bit
B. multiple-bit
C. burst
D. recoverable
Select an option to see the answer and solution.
A 4 KHz noise less channel with one sample ever 125 per sec is used to transmit digital signals. If Delta modulation is selected, then how many bits per second are actually sent?
A. 32 kbps
B. 8 kbps
C. 128 kbps
D. 64 kbps.
E. None of the above
Select an option to see the answer and solution.
UDP is:
A. Not a part of the TCP/IP suite
B. Connection oriented and unreliable
C. Connection orientated and reliable
D. Connectionless and unreliable
E. None of the above
Select an option to see the answer and solution.
The interactive transmission of data within a time sharing system may be best suited to
A. simplex lines
B. half-duplex lines
C. full-duplex lines
D. biflex-line
E. None of the above
Select an option to see the answer and solution.