Error rate is
A. an error-detecting code based on a summation operation performed on the bits to be checked.
B. a check bit appended to an array of binary digits to make the sum of all the binary digits.
C. a code in which each expression conforms to specific rules of construction, so that if certain errors occur in an expression, the resulting expression will not conform to the rules of construction and
D. the ratio of the number of data units in error to the total number of data units
E. None of the above
Select an option to see the answer and solution.
Intranets and extranets can use their network fire walls and other security features to establish secure Internet links within an enterprise or with its trading partners. Select the best fit for answer:
A. Network Server
B. Virtual Private Network
C. Network operating system
D. OSI
Select an option to see the answer and solution.
Modem is used in data transmission. When was it invented and in which country?
A. 1963, USA
B. 1965, Germany
C. 1950, USA
D. 1950, Japan
E. None of the above
Select an option to see the answer and solution.
Which of the following technique is used for Time-To-Line (TTL)?
A. a technique used in best-effort delivery system to avoid endlessly looping packets.
B. a technique used by protocols in which a lower level protocol accepts a message from a higher level protocol and places it in the data portion of the low level frame
C. One of the pieces that results when an IP gateway divides an IP datagram into smaller pieces for transmission across a network that cannot handle the original datagram size.
D. All of the above
E. None of the above
Select an option to see the answer and solution.
Communication network is
A. one or more conductors that serve as a common connection for a related group of devices
B. a continuous frequency capable of being modulated or impressed with a second signal
C. the condition with two or more stations attempt to use the same channel at the same time
D. a collection of interconnected functional units that provides a data communications service among stations attached to the network
E. None of the above
Select an option to see the answer and solution.
Which of the following is an advantage to using fiber optics data transmission?
A. resistance to data theft
B. fast data transmission rate
C. low noise level
D. few transmission errors
E. All of the above
Select an option to see the answer and solution.
Which of the following statement is incorrect?
A. if a host moves from one network to another, its IP address must change
B. routing uses the network portion of the IP address, the path taken by packets travelling to a host with multiple IP addresses depends on the address used.
C. IP addresses encode both a network and a host on that network, they do not specify an individual machine, but a connection to a network.
D. All of the above
E. None of the above
Select an option to see the answer and solution.
Bandlimited signal is
A. transmission of signals without modulation
B. a signal all of whose energy is contained within a finite frequency range
C. simultaneous transmission of data to a number of stations
D. All of the above
E. None of the above
Select an option to see the answer and solution.
Computers in a LAN can be interconnected by radio and infrared technologies.
A. Wireless LANs
B. Network Topologies
C. Multiplexer
D. Modem
E. 255.255.255.255
Select an option to see the answer and solution.
You have a network ID of 134.57.0.0 and you need to divide it into multiple subnets in which at least 600 host IDs for each subnet are available. You desire to have the largest amount of subnets available. Which subnet mask should you assign?
A. 255.255.224.0
B. 255.255.240.0
C. 255.255.248.0
D. 255.255.255.0
E. 255.255.255.255
Select an option to see the answer and solution.
How many digits of the Network User Address are known as the DNIC (Data Network Identification Code)?
A. first three
B. first four
C. first five
D. first seven
E. None of the above
Select an option to see the answer and solution.
Which of the following is the address of the router?
A. The IP address
B. The TCP address
C. The subnet mask
D. The default gateway
E. None of the above
Select an option to see the answer and solution.
Thorough planning must take place when setting up an 802.3 network. A maximum number of segments can separate any two nodes on the network. What is the maximum number of segments allowed between two nodes?
A. Five
B. Two
C. Four
D. Six
E. Three
Select an option to see the answer and solution.
A devices that links two homogeneous packet-broadcast local networks, is
A. hub
B. bridge
C. repeater
D. gateway
E. None of the above
Select an option to see the answer and solution.
Identify the odd term amongst the following group:
A. Coaxial cable
B. Optical fibre
C. Twisted pair wire
D. Microwaves
E. None of the above
Select an option to see the answer and solution.
Which of the following divides the high speed signal into frequency bands?
A. t-switch
B. modem
C. frequency-division multiplexer
D. time-division multiplexer
E. None of the above
Select an option to see the answer and solution.
What is the first octet range for a class C IP address?
A. 192 - 255
B. 192 - 223
C. 192 - 226
D. 128 - 191
E. 1 - 126
Select an option to see the answer and solution.
Which utility is useful for finding the local host name?
A. NBTSTAT
B. Netstat
C. PING
D. Hostname
E. None of the above
Select an option to see the answer and solution.
Which of the following conditions is used to transmit two packets over a medium at the same time?
A. Contention
B. Collision
C. Synchronous
D. Asynchronous
E. None of the above
Select an option to see the answer and solution.
The slowest transmission speeds are those of
A. twisted-pair wire
B. coaxial cable
C. fiber-optic cable
D. microwaves
E. None of the above
Select an option to see the answer and solution.