Velocity at a certain point in case of streamline flow is
Select an option to see the answer and solution.
Chemical Engineering · all questionsFluid Mechanics
Fluid Mechanics
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
745
Questions
4/38
Page
Pick an option on a question to see the right answer and solution.
Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is
Select an option to see the answer and solution.
In which type of fluid flow, the velocity of flow of fluid changes from point to point in the fluid at any instant?
Select an option to see the answer and solution.
If the head over the triangular notch is doubled, the discharge will increase by __________ times.
Select an option to see the answer and solution.
Which of the following pipe bends will incur the largest head loss ?
Select an option to see the answer and solution.
The fluid in which the shearing stress within it is proportional to the velocity gradient across the sheared section, is called a __________ fluid.
Select an option to see the answer and solution.
The distance between metacentre and __________ is called metacentric height.
Select an option to see the answer and solution.
The __________ pressure is measured by a static tube.
Select an option to see the answer and solution.
Boiler feed water pump is usually a __________ pump.
Select an option to see the answer and solution.
Applying a pressure drop across a capillary results in a volumetric flow rate 'Q' under laminar flow conditions. The flow rate for the same pressure drop, in a capillary of the same length but half the radius is
Select an option to see the answer and solution.
Foot valves are provided in the suction line of a centrifugal pump to
Select an option to see the answer and solution.
Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics.
Select an option to see the answer and solution.
Lower BWG means __________ of the tube.
Select an option to see the answer and solution.
In magnetic flow meters, voltage generation is
Select an option to see the answer and solution.
Net positive suction head (NPSH) of a centrifugal pump must be
Select an option to see the answer and solution.
In a fully turbulent flow (Re > 105) in a pipe of diameter 'd', for a constant pressure gradient, the dependence of volumetric flow rate of an incompressible fluid is
Select an option to see the answer and solution.
A pressure head of 320 metres of water in meters of CCl4 (sp.gr = 1.6) will be
Select an option to see the answer and solution.
A fluidis moving at critical flow condition (NRe = 2100) through a pipe of dia 3 cms. Velocity of flow is __________ cm/sec.
Select an option to see the answer and solution.
Drag co-efficient for flow past immersed body is the ratio of __________ to the product of velocity head and density.
Select an option to see the answer and solution.
The co-efficient of discharge of an orificemeter is a function of
Select an option to see the answer and solution.