Q401
Open questionAbility of a material to absorb energy in deformation in the plastic range is characterised as its
Select an option to see the answer and solution.
Chemical Engineering · all questionsMaterials And Construction
Materials And Construction
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
503
Questions
21/26
Page
Pick an option on a question to see the right answer and solution.
Q402
Open questionEvaporator used for concentrating tomato juice is made of
Select an option to see the answer and solution.
Q403
Open questionWhich of the following alloying elements is present in maximum percentage in high speed steel.
Select an option to see the answer and solution.
Q404
Open questionHardest material so far found is
Select an option to see the answer and solution.
Q405
Open questionA hardness depth of about 3 mm can be achieved by induction hardness in __________ seconds.
Select an option to see the answer and solution.
Q406
Open questionMild steel storage vessels are suitable for the storage of
Select an option to see the answer and solution.
Q407
Open questionIn the Contact process of sulphuric acid manufacture, 98% acid cooler is made of
Select an option to see the answer and solution.
Q408
Open questionSteel rods are used in reinforced concrete to increase its __________ strength.
Select an option to see the answer and solution.
Q409
Open questionAddition of __________ in steel can help in increasing the depth of hardness.
Select an option to see the answer and solution.
Q410
Open questionMolten phthalic anhydride is stored in a/an __________ vessel.
Select an option to see the answer and solution.
Q411
Open questionCompressive strength of wood is usually more along the grains. The tenile strength of wood as compared to that of steel is about
Select an option to see the answer and solution.
Q412
Open questionHigh degree of toughness is a must for
Select an option to see the answer and solution.
Q413
Open questionConcrete tank can be used to store
Select an option to see the answer and solution.
Q414
Open questionAn elastic behaviour of materials is expressed in terms of
Select an option to see the answer and solution.
Q415
Open questionNitriding of steel is done (in electric furnace) at __________ °C.
Select an option to see the answer and solution.
Q416
Open questionCast iron and steel pipes are produced by __________ casting.
Select an option to see the answer and solution.
Q417
Open questionSuper conductors are those substances, which
Select an option to see the answer and solution.
Q418
Open questionPresence of 0.3 to 0.5% arsenic in copper increases its
Select an option to see the answer and solution.
Q419
Open questionAmount of energy that a material can absorb before its fracture is a measure of its
Select an option to see the answer and solution.
Q420
Open questionResidual magnetism in steel for magnets is increased by the addition of
Select an option to see the answer and solution.