Q441
Open questionThe digester of a Gobar gas plant is a
Select an option to see the answer and solution.
Chemical Engineering · all questionsMaterials And Construction
Materials And Construction
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
503
Questions
23/26
Page
Pick an option on a question to see the right answer and solution.
Q442
Open questionThe ability of a material to absorb energy in the elastic range is a measure of its
Select an option to see the answer and solution.
Q443
Open questionWhich of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system?
Select an option to see the answer and solution.
Q444
Open questionBrass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its
Select an option to see the answer and solution.
Q445
Open questionRotary kilns in cement industry are lined with____bricks.
Select an option to see the answer and solution.
Q446
Open questionThe impure iron (pig iron) that is tapped out from blast furnace contains about __________ percent carbon.
Select an option to see the answer and solution.
Q447
Open questionWhich of the following is not an alloy of copper and tin?
Select an option to see the answer and solution.
Q448
Open questionCast iron detachable joint is used in __________ pipes.
Select an option to see the answer and solution.
Q449
Open questionContainers made of high silicon cast iron (14% Si) are not suitable for the storage of
Select an option to see the answer and solution.
Q450
Open questionThe softest material just next to talc in the Mhos scale is
Select an option to see the answer and solution.
Q451
Open questionBrass container is suitable for storing
Select an option to see the answer and solution.
Q452
Open questionHardening of steel is not possible unless it is heated __________ critical point.
Select an option to see the answer and solution.
Q453
Open questionMild steel is a/an __________ steel.
Select an option to see the answer and solution.
Q454
Open question__________ is added in low carbon steel to raise its yield point.
Select an option to see the answer and solution.
Q455
Open questionAddition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets.
Select an option to see the answer and solution.
Q456
Open questionTelfon (PTFE) is corroded by
Select an option to see the answer and solution.
Q457
Open questionVycor, a widely used material for making 'thermal wells' in temperature measurement, is a
Select an option to see the answer and solution.
Q458
Open questionElectronic structure of a material is generally studied by
Select an option to see the answer and solution.
Q459
Open question__________ alloys have the highest specific strength of all the structural materials out of the following.
Select an option to see the answer and solution.
Q460
Open questionSlow plastic deformation of metals under a constant stress is termed as __________ failure.
Select an option to see the answer and solution.