A heat sink is generally used with a transistor to ___________
Select an option to see the answer and solution.
Electrical Engineering · all questionsTransistors
Transistors
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
123
Questions
5/7
Page
Pick an option on a question to see the right answer and solution.
For germanium transistor amplifier, VCE should ___________ for faithful amplification
Select an option to see the answer and solution.
In a base resistor method, if the value of ß changes by 50, then collector current will change by a factor
Select an option to see the answer and solution.
For good stabilsation in voltage divider bias, the current I1 flowing through R1 and R2 should be equal to or greater than
Select an option to see the answer and solution.
The operating point is also called the ___________
Select an option to see the answer and solution.
In the design of a biasing circuit, the value of collector load RC is determined by ___________
Select an option to see the answer and solution.
The operating point ___________ on the a.c. load line
Select an option to see the answer and solution.
In a parallel LC circuit, if the input signal frequency is increased above resonant frequency then ___________
Select an option to see the answer and solution.
At the base emitter junctions of a transistor, one finds ___________
Select an option to see the answer and solution.
The current IB is ___________
Select an option to see the answer and solution.
At parallel resonance, the ratio is ___________
Select an option to see the answer and solution.
The Q of a tuned circuit refers to the property of ___________
Select an option to see the answer and solution.
The circuit that provides the best stabilization of operating point is ___________
Select an option to see the answer and solution.
Operating point represents ___________
Select an option to see the answer and solution.
The point of intersection of d.c. and a.c. load lines represents ___________
Select an option to see the answer and solution.
For faithful amplification by a transistor circuit, the value of VCE should ___________ for silicon transistor
Select an option to see the answer and solution.
At series resonance, the phase angle between applied voltage and circuit is ___________
Select an option to see the answer and solution.
At parallel resonance, the line current is ___________
Select an option to see the answer and solution.
At parallel resonance, the net reactive component circuit current is ___________
Select an option to see the answer and solution.
Q100
Open questionAt series resonance, the net reactive component of circuit current is ___________
Select an option to see the answer and solution.