Consider the following gate network
Which one of the following gates is redundant?
A. Gate No. 1
B. Gate No. 2
C. Gate No. 3
D. Gate No. 4
Select an option to see the answer and solution.
The logic circuit realized by the circuit shown in the given figure will be
Select an option to see the answer and solution.
If (0.100)2 = (x)10 , then x is
Select an option to see the answer and solution.
If the input to a T flip-flop is a 100 MHz signal, the final output of three T flip-flop in a cascadeis:
A. 1000 MHz
B. 520 MHz
C. 333 MHz
D. 12.5 MHz
Select an option to see the answer and solution.
In a JK flip-flop, J is connected to Q and K is connected to Q outputs. The JK flip-flop converts into a
A. R-S flip flop
B. D flip flop
C. T flip flop
D. Clocked R-S flip flop
Select an option to see the answer and solution.
A semiconductor RAM has a 12-bit address register and an 8-bit data register. The total number of bits in the memory is
A. 256 bits
B. 4,096 bits
C. 32,768 bits
D. 10,48,756 bits
Select an option to see the answer and solution.
The canonical SOP form of given expression f = A + AB + ABC is
A. Σm(4, 5, 6, 7)
B. Σm(1, 2, 3, 4)
C. Σm(1, 3, 6, 7)
D. Σm(1, 7, 4)
Select an option to see the answer and solution.
Maximum value of signal to noise ratio of an 8 bit ADC with an I/P range of 10 V will be
A. 50 dB
B. 43.8 dB
C. 48.9 dB
D. 49.8 dB
Select an option to see the answer and solution.
In the below circuit, X is given by
A. X = A B C + A B C + A B C + ABC
B. X = A BC + A B C + AB C + A B C
C. X = AB + BC + AC
D. X = AB + BC + AC
Select an option to see the answer and solution.
A 0-10 volt analog to digital converter requires to have a resolution of 0.025%. The rms value of quantization error will be
A. 176 micro volt
B. 705 micro volt
C. 352 micro volt
D. 1410 micro volt
Select an option to see the answer and solution.
What is the addition of the binary numbers 11011011010 and 010100101?
A. 0111001000
B. 1100110110
C. 11101111111
D. 10011010011
Select an option to see the answer and solution.
For the circuit in figure, identify the Boolean function implemented
A. y = ( A + B + C ) D
B. y = A .B .C + D
C. y = ABC + D
D. y = (A + B + C)D
Select an option to see the answer and solution.
1024 × 1 capacity RAM chips are available for a PC system, Which requires a memory capacity of 1024 bytes. Find out the number of RAM chips.
Select an option to see the answer and solution.
Dual-slope integration type Analog-to-Digital converters provide
1. Higher speeds compared to all other types of A/D converters.
2. Very good accuracy without putting extreme requirement on component stability.
3. Good rejection of power supply hum.
4. Poor resolution compared to all other types of A/D converters for the same number of bits.
Which of these statements are correct?
A. 2 and 3 only
B. 3 and 4 only
C. 4 and 1 only
D. 1, 2, 3 and 4
Select an option to see the answer and solution.
The 2's complement representation of -17 is
A. 101110
B. 101111
C. 111110
D. 110001
Select an option to see the answer and solution.
The function (A ⊕ B) is to be realized using only 2-input NAND gates. The minimum number of 2-input NAND gates required for such a realization is
Select an option to see the answer and solution.
A flip-flop is a
A. Combinational logic circuit and edge sensitive
B. Sequential logic circuit and edge sensitive
C. Combinational logic circuit and level sensitive
D. Sequential logic circuit and level sensitive
Select an option to see the answer and solution.
An 8-bit DAC produces Vout = 0.05 V for a digital input of 00000001. The full scale output will be nearly.
A. 12.8 V
B. 17.8 V
C. 22.8 V
D. 27.8 V
Select an option to see the answer and solution.
An 8 bit ADC has a full scale input of 2.55 V. If other cumulative errors are 2.55 mV, determine the maximum error
A. 10 mV
B. 12.55 mV
C. 7.45 mV
D. 2.55 mV
Select an option to see the answer and solution.
The MSB of a binary number has a weight of 512, the number consists of . . . . . . . .
A. 4 bits
B. 10 bits
C. 8 bits
D. 16 bits
Select an option to see the answer and solution.