Q161
Open questionPlacement of dimensions on a drawing is controlled by ________.
Select an option to see the answer and solution.
Mechanical Engineering · all questionsEngineering Drawing
Engineering Drawing
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
255
Questions
9/13
Page
Pick an option on a question to see the right answer and solution.
Q162
Open questionWhen lettering a CAD drawing, for clarity you should limit the number of fonts to:
Select an option to see the answer and solution.
Q163
Open questionIn order to set drawing limits for a 'C' size architectural drawing the drafter should set the limits to ________.
Select an option to see the answer and solution.
Q164
Open questionElevation drawings will include information about ________.
Select an option to see the answer and solution.
Q165
Open questionIn these drawings it is necessary to show cut surfaces and distinguish between adjacent parts:
Select an option to see the answer and solution.
Q166
Open questionThe top, front, and bottom views align in this manner:
Select an option to see the answer and solution.
Q167
Open questionThis is a solid shape that fits inside the mold and forms a hole in a cooled cast metal or molten plastic object:
Select an option to see the answer and solution.
Q168
Open questionThis type of axonometric drawing has equal foreshortening along two axis directions and a different amount on the third axis:
Select an option to see the answer and solution.
Q169
Open questionIn order to convert fractional inches into decimal inches __________.
Select an option to see the answer and solution.
Q170
Open questionA typical set of mechanical working drawings includes ________.
Select an option to see the answer and solution.
Q171
Open questionThis is the most common application for developments and intersections:
Select an option to see the answer and solution.
Q172
Open questionThis process recognizes the inherent interrelationships between design and manufacturing:
Select an option to see the answer and solution.
Q173
Open questionIn order to create one solid model from two or more separate solid shapes the drafter will need to position them and then ________.
Select an option to see the answer and solution.
Q174
Open questionThe primary unit of measurement for engineering drawings and design in the mechanical industries is the:
Select an option to see the answer and solution.
Q175
Open questionThis type of projection is when projectors are parallel to each other, but are at an angle other than 90 degrees to the plane of projection:
Select an option to see the answer and solution.
Q176
Open questionThis type of solid is formed by sweeping a shape along a linear path:
Select an option to see the answer and solution.
Q177
Open questionIn offset sections, offsets or bends in the cutting plane are all:
Select an option to see the answer and solution.
Q178
Open questionWhen setting up a mechanical drawing in Auto-CAD the drafter should set the units to ________.
Select an option to see the answer and solution.
Q179
Open questionIn working drawings, these show all necessary information not given directly on the drawing with its dimensions and notes:
Select an option to see the answer and solution.
Q180
Open questionReferring to the fractional inches to decimal inches to millimeter conversion chart on page 55 what is the equivalent mm measurement of inch.
Select an option to see the answer and solution.