Q201
Open questionSwitches and relays should be shown in this position with no operating force or applied energy:
Select an option to see the answer and solution.
Mechanical Engineering · all questionsEngineering Drawing
Engineering Drawing
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
255
Questions
11/13
Page
Pick an option on a question to see the right answer and solution.
Q202
Open questionThese types of pipes are generally connected with bell and spigot joints or flanged joints:
Select an option to see the answer and solution.
Q203
Open questionAn engineer's scale would be used to measure lines on a drawing where the scale factor reads ________.
Select an option to see the answer and solution.
Q204
Open questionUsing the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________.
Select an option to see the answer and solution.
Q205
Open questionThe ________ tool on the Dimension tool bar places the length of an arch on a drawing.
Select an option to see the answer and solution.
Q206
Open questionThese are special installations of stone or concrete marking the locations of points accurately determined by precise surveying:
Select an option to see the answer and solution.
Q207
Open questionThe Press-Pull tool will ________ the face of a solid model in the direction it faces.
Select an option to see the answer and solution.
Q208
Open questionIn this type of view, the cutting plane line indicates both the location of the cutting plane and the direction of sight:
Select an option to see the answer and solution.
Q209
Open questionWhen designing a home for a client, one of the most important pre-design considerations that an architect needs to address is ________.
Select an option to see the answer and solution.
Q210
Open questionThis is formed where three or more surfaces intersect:
Select an option to see the answer and solution.
Q211
Open questionIn developing a multi-view drawing, the drafter can use a ________ line to help locate the top and right side views.
Select an option to see the answer and solution.
Q212
Open questionThis material is used in masonry construction, most commonly for ornamental facing:
Select an option to see the answer and solution.
Q213
Open questionCAD programs which incorporate parametric modeling utilize a system in which the dimensions control the ________.
Select an option to see the answer and solution.
Q214
Open questionThe most common geometric form used in gears today is this:
Select an option to see the answer and solution.
Q215
Open questionIn an exploded assembly drawing it is customary for the drafter to use a ________ line to illustrate how parts fit together.
Select an option to see the answer and solution.
Q216
Open questionThis type of drawing is created to calculate areas, locate property lines, and locate building projects and facilities:
Select an option to see the answer and solution.
Q217
Open questionArchitectural drafters generally prefer to use ________ drawings to help illustrate 3-dimensional views of a structure.
Select an option to see the answer and solution.
Q218
Open questionWhen creating a block the drafter needs to pay particular attention to selecting a base point because it determines the __________.
Select an option to see the answer and solution.
Q219
Open questionThis is used to indicate that a surface is to be machined:
Select an option to see the answer and solution.
Q220
Open questionThis allows the designer to conceptualize objects more easily without having to make costly illustrations, models, or prototypes:
Select an option to see the answer and solution.