Q161
Open questionIn most machine members, the damping capacity of the material should be
Select an option to see the answer and solution.
Mechanical Engineering · all questionsMachine Design
Machine Design
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
605
Questions
9/31
Page
Pick an option on a question to see the right answer and solution.
Q162
Open questionWhich of the following bearing is preferred for oscillating conditions?
Select an option to see the answer and solution.
Q163
Open questionThe contact ratio for gears is
Select an option to see the answer and solution.
Q164
Open questionWhich of the following material has the maximum ductility?
Select an option to see the answer and solution.
Q165
Open questionIn radial bearings, the load acts __________ to the axis of rotation.
Select an option to see the answer and solution.
Q166
Open questionBasic hole is one
Select an option to see the answer and solution.
Q167
Open questionTapered roller bearings can take
Select an option to see the answer and solution.
Q168
Open questionThe power transmitted by means of a belt depends upon
Select an option to see the answer and solution.
Q169
Open questionIn a multiple V-belt drive, if one of the belts break, then
Select an option to see the answer and solution.
Q170
Open questionThe resultant axial load on a bolt depends upon
Select an option to see the answer and solution.
Q171
Open questionThe process extensively used for making bolts and nuts is
Select an option to see the answer and solution.
Q172
Open questionIn a marine flange coupling, the pitch circle diameter of bolts is taken as
Select an option to see the answer and solution.
Q173
Open questionA sliding bearing in which although lubricant is present, the working surfaces __________ contact each other at least part of the time, is called boundary lubricated bearing.
Select an option to see the answer and solution.
Q174
Open questionIn a steam engine, the valve rod is connected to an eccentric rod by means of
Select an option to see the answer and solution.
Q175
Open questionAn elastic bar is fixed at the upper end and loaded at the lower end by a falling weight. The shock load produced can be reduced by
Select an option to see the answer and solution.
Q176
Open questionCap screws are
Select an option to see the answer and solution.
Q177
Open questionAll stresses produced in a belt are
Select an option to see the answer and solution.
Q178
Open questionThe included angle for the British Association thread is
Select an option to see the answer and solution.
Q179
Open questionThe difference between the tooth space and the tooth thickness as measured on the pitch circle, is called
Select an option to see the answer and solution.
Q180
Open questionIn nitrated parts, the origins of the fatigue cracks will occur at
Select an option to see the answer and solution.