The space factor for stranded rope is . . . . . . . .
A. 30 - 40%
B. 40 - 50%
C. 50 - 60%
D. 75%
Select an option to see the answer and solution.
Untwisting of strands prevented by . . . . . . . .
A. Ordinary lay
B. Left hand lay
C. Langs lay
D. Adjacent ropes are of opposite lays
Select an option to see the answer and solution.
If the failure of detaching hook to hold the cage, the next safety device may be fitted in head gear is . . . . . . . .
A. Safety catches
B. Automatic tripping device
C. Keps
D. All of these
Select an option to see the answer and solution.
The pressure developed by each impellar varies, as the square of . . . . . . . .
A. Power
B. Speed
C. Velocity
D. Quantity
Select an option to see the answer and solution.
The thrust of the pump is counter acted by . . . . . . . .
A. End thrust
B. By pass disc
C. Delivery
D. Hydraulic balencing disc
Select an option to see the answer and solution.
In the direct haulage system, which is generally employed up a gradient steeper than . . . . . . . .
A. 1 in 2
B. 1 in 3
C. 1 in 10
D. All of these
Select an option to see the answer and solution.
In shearer, the power source is . . . . . . . .
A. Battery
B. Compressed air
C. Electricity Max Voltage 6.6 KV AC
D. Electricity Max Voltage 1.1 KV AC
Select an option to see the answer and solution.
Double drum balanced haulage system reduces . . . . . . . .
A. Peack power demand
B. Derailing
C. Wear
D. Corrosion
Select an option to see the answer and solution.
. . . . . . . . of the circumferance of the rope is in contact with the groove of the head gear pulley.
Select an option to see the answer and solution.
The plates in oremerod safety hook is assembled on a centre pivot and a copper rivet . . . . . . . . mm diameter passes through a small hole of all the plates when assembled.
Select an option to see the answer and solution.
For how many years the winding rope has to be used?
Select an option to see the answer and solution.
The Gathering head in gathering arm leader is elevated by . . . . . . . .
A. Piston rods
B. Hydraulic jack
C. Jams
D. None
Select an option to see the answer and solution.
Steel rigid guides are installed in some . . . . . . . . mines.
A. Shallow
B. Medium
C. Deep
D. All of these
Select an option to see the answer and solution.
The wires spiral round the core in the same direction as the threads of right hand screw called . . . . . . . .
A. Non lay
B. Stranded
C. Right hand lay
D. Left hand lay
Select an option to see the answer and solution.
In main and tail, needs two separate drums one for . . . . . . . . other for . . . . . . . .
A. Main rope, spliced rope
B. Main rope, tail rope
C. Multy rope, locked coil
D. All of these
Select an option to see the answer and solution.
One of the rope haulage is . . . . . . . .
A. Cable reel
B. Gravity
C. Electric gyro
D. Mobile stage loader
Select an option to see the answer and solution.
The transport arrangement, which operates between main incline/shaft and the main under ground loading point called . . . . . . . .
A. Gathering haulage
B. Main haulage
C. Face haulage
D. None
Select an option to see the answer and solution.
Which pump must never be started without priming with water as it does not create a vacuum of more than a few centimeters when working on air.
A. Reciprocats
B. Mono
C. Turbine
D. Submersible
Select an option to see the answer and solution.
The detaching hook always placed just below the rope . . . . . . . .
A. Distribution plate
B. Bull chains
C. Capel
D. Cage chains
Select an option to see the answer and solution.
The sulphur percentage in wire ropes . . . . . . . .
A. 0.4
B. 0.48
C. 0.033
D. 0.014
Select an option to see the answer and solution.