One of the conveyor system haulage is . . . . . . . .
A. Plate
B. Trolley
C. Cable reel
D. Gyro
Select an option to see the answer and solution.
In which endless haulage the screw clip can be employed . . . . . . . .
A. Over rope
B. Under rope
C. Main and tail
D. Disc
Select an option to see the answer and solution.
A device that attaches to rotating shaft and converts the energy of motion, into the fluid to be punped.
A. eye
B. impellar
C. specific speed
D. head
Select an option to see the answer and solution.
There are two ranging drum at each end of the machine, known as
Select an option to see the answer and solution.
The speed of high speed plough . . . . . . . . m/min.
A. 18 - 30
B. 20 - 40
C. 30 - 60
D. 60 - 80
Select an option to see the answer and solution.
A centrifugal pump rotating at 500 rpm delivers 70 m3 /s of water. If the speed is reduced to 200 rpm, the quantity of water delivered in m3 /s will be
Select an option to see the answer and solution.
The example for equal lay rope is . . . . . . . .
A. Warrington pattern
B. Filler pattern
C. Seale pattern
D. All of these
Select an option to see the answer and solution.
Turbine pump carries . . . . . . . . disc.
A. Balancing
B. Unbalancing
C. Equalent orifice
D. None
Select an option to see the answer and solution.
A strand with flexible core is more . . . . . . . .
A. None flexible
B. Rigid
C. Flexible
D. None
Select an option to see the answer and solution.
The formula for finding mass of rope whose K is constant.
Select an option to see the answer and solution.
A single stage axial flow halex installed in the suction type fan impeller to lower the NPSHR . . . . . . . .
A. Volute
B. Casing
C. Inducer
D. Eye
Select an option to see the answer and solution.
Which of the indigenous firm do manufacture SDL & LHD in India.
A. HEC Ltd
B. Atlas Copco
C. EIMCO Elecon
D. Tractors India Ltd
Select an option to see the answer and solution.
The measuring unit of head is . . . . . . . .
A. Meters
B. Feet
C. Weight
D. Speed
Select an option to see the answer and solution.
In connection with lowering or raising of persons by means of bucket etc for a shaft exceeding 'A' m depth, there shall be significant cover overhead for protection from things falling down the shaft A is given by . . . . . . . .
A. 130 m
B. 190 m
C. 270 m
D. 480 m
Select an option to see the answer and solution.
The iron percentage in wire ropes . . . . . . . .
A. 98.863
B. 80.364
C. 97.4
D. 96.863
Select an option to see the answer and solution.
The wires sprial round the core in the same direction as the threads of a left hand screw are called . . . . . . . .
A. Non lay
B. Stranded
C. Right hand lay
D. Left hand ropes
Select an option to see the answer and solution.
The rate of loading of gathering arm loader depend upon the number of . . . . . . . .
A. m/sec
B. Strokes/min
C. Cycles/min
D. Trips/min
Select an option to see the answer and solution.
Sandwich conveyor is a type of . . . . . . . .
A. High angle conveyor
B. Cable belt conveyor
C. Chain conveyor
D. Shaker conveyor
Select an option to see the answer and solution.
The example for non stranded rope is . . . . . . . .
A. Haulage rope seven strand rope
B. Locked coil rope
C. Compound strand rope
D. None
Select an option to see the answer and solution.
Lining segments of surge wheel made of . . . . . . . .
A. Cast Iron
B. Mild steel
C. Soft steel
D. Tin
Select an option to see the answer and solution.