Geo phone suitable for detecting frequencies in the range of . . . . . . . .
A. 0 - 10 Hz
B. 1 - 100 Hz
C. 100 - 200 Hz
D. Above 200 Hz
Select an option to see the answer and solution.
In dumper operation, specific fuel oil consumption can be controlled by . . . . . . . .
A. Adopting truck despatch system
B. Proper selection of libricating for engine
C. Proper maintanence of haul roads
D. All above
Select an option to see the answer and solution.
The height of bench for 10 m3 shovel is
Select an option to see the answer and solution.
The value of ore is Rs. 600 per ton, production cost Rs. 400 per ton and cost of over burden removal is Rs. 50 per m3 , the break even stripping ratio in m3 /ton is
A. 4 : 1
B. 1 : 3
C. 3 : 1
D. 1 : 4
Select an option to see the answer and solution.
Which is used for stripping top soil and making shallow cuts and trenches upto a depth of 3.5 - 6 m.
A. Dipper shovel
B. Tracter shovel
C. Ditching shovel
D. Stripper shovel
Select an option to see the answer and solution.
Solomons formula used for calculating.
A. Factor of safety
B. Load density of support
C. Support resistance
D. Incubation period
Select an option to see the answer and solution.
In order to avoid formation of toe in hard rocks the depth of shot hole should be
A. 0.5 times the height of the depth
B. 0.5 - 1 m deeper below the level of bench
C. Same at the level of bench
D. 2 m below the level of bench
Select an option to see the answer and solution.
Limiting gredient of drag line.
Select an option to see the answer and solution.
Cut holes are called
A. Easers
B. Trimmers
C. Sumpers
D. None
Select an option to see the answer and solution.
The line of intersection of the quarry side with the subadjacent unmined surface. Line defines the upper contour of openings.
A. Crest
B. Pit floor
C. Trench
D. Cut
Select an option to see the answer and solution.
The ratio at which the cost of open cast mining equals that of under ground mining is
A. Break even stripping ratio
B. Limiting stripping ratio
C. Quarriable limit
D. Stripping ratio
Select an option to see the answer and solution.
In India coal seams with inclination as steep as . . . . . . . . have been worked by mechanical open cast.
A. 1 in 2
B. 1 in 3
C. 1 in 4
D. 1 in 5
Select an option to see the answer and solution.
The maximum size of the boulder that can loaded by shovel is times the bucket capacity.
Select an option to see the answer and solution.
The mining which is not completely effected by weather.
A. Striping
B. Quarrying
C. Placer
D. Underground mining
Select an option to see the answer and solution.
Peak particle velocity is estimated from the equation.
Select an option to see the answer and solution.
Depth to which extraction of mineral done economically by open cast project called . . . . . . . .
A. Stripping ratio
B. Break even stripping ratio
C. Economical depth
D. Quarriable limit
Select an option to see the answer and solution.
Limitation for inclined drilling is . . . . . . . .
A. 10° off the vertical
B. 30° off the vertical
C. 45° off the vertical
D. 60° off the vertical
Select an option to see the answer and solution.
Which soil is best for scraper.
A. Sandy
B. Gravel
C. Hard
D. Very hard
Select an option to see the answer and solution.
Drag shovels commonly used to load into . . . . . . . .
A. Tractor
B. Dumper
C. Buckets
D. Back fill
Select an option to see the answer and solution.
Where drag line is used before starting excavation of coal a clear space of not less than . . . . . . . .m shall be created.
Select an option to see the answer and solution.