Central Institute of Plastics Engineering and Technology Admission 2027: Eligibility, Dates, Selection Process & Application
Central Institute of Plastics Engineering and Technology, Dehradun offers admission to its diploma programmes for the 2027 academic session. Established in 1968 with a 8 Acres campus in Dehradun, Uttarakhand, the public/government institute is AICTE Approved. The institution features 7 Faculty Members and an intake capacity of 1,058 Seats. Main course offerings include Diploma in Plastics Technology, Diploma in Plastics Mould Technology. Prospective students interested in taking admission must fulfill the minimum aggregate marks and subject combination prerequisites required for their chosen programme before submitting the application form.
Admission to the college is based on candidate performance in qualifying examinations and merit guidelines. Candidates seeking admission must clear the specified cutoff scores for the session. Qualified applicants are invited to take part in the counseling process, seat allotment rounds, and document verification. Final admission is confirmed after submitting the necessary marksheets, identity proof, and paying the prescribed tuition fee on the official portal.
Central Institute of Plastics Engineering and Technology Highlights 2027
| Parameter | Details |
|---|---|
| College Name | Central Institute of Plastics Engineering and Technology, Dehradun |
| Short Name | Central Institute of Plastics Engineering and Technology |
| Institute Ownership | Public/Government |
| Location | Dehradun, Uttarakhand |
| Approvals & Affiliations | AICTE Approved |
| Campus Area | 8 Acres |
| Total Faculty | 7 Faculty Members |
| Total Student Intake | 1,058 Seats |
| Mode of Admission | Online Application & Entrance / Merit Counseling |
| Selection Basis | Academic Merit in Qualifying Examination |
| Accepted Entrance Exams | Qualifying Merit Screening |
| Counseling & Seat Quota | State/University Counseling & Merit Screening |
| Official Admission Portal | https://www.cipet.gov.in/centres/cipet-dehradun/introduction.php |
Central Institute of Plastics Engineering and Technology Course-Wise Eligibility & Selection Criteria 2027
The institution offers structured admission across multiple degree levels. Below is the detailed breakdown of programs, seat intake, selection basis, and eligibility criteria:
| Program Name | Seat Intake | Selection Basis / Accepted Exams | Minimum Eligibility Criteria |
|---|---|---|---|
| Diploma in Plastics Technology | 120 Seats | Qualifying Merit | 10+2 / Graduation in relevant stream with minimum qualifying marks |
| Diploma in Plastics Mould Technology | 60 Seats | Qualifying Merit | 10+2 / Graduation in relevant stream with minimum qualifying marks |
Central Institute of Plastics Engineering and Technology Step-by-Step Selection Roadmap & Seat Allotment Process
Admissions for the 2027 academic session follow a transparent, multi-stage evaluation roadmap to ensure merit-based seat allocation:
- Phase 1: Prerequisites & Eligibility Check: Aspirants must verify subject prerequisites and aggregate percentage criteria for their chosen course.
- Phase 2: Entrance Examination / Merit Registration: Candidates must appear in mandatory national/state entrance tests (Merit Evaluation) or submit qualifying marks.
- Phase 3: Counseling Registration & Choice Locking: Register on the official counseling portal, fill choices, and select preference options.
- Phase 4: Merit List Publication & Seat Allotment: Review round-wise seat allotment lists issued on the basis of rank, reservation norms, and available intake.
- Phase 5: Document Authentication & Fee Payment: Report for physical or digital document verification, pay the admission confirmation fee, and complete final enrollment at the institute.
Central Institute of Plastics Engineering and Technology Admission Timelines 2027
| Event Phase | Expected Timeline |
|---|---|
| Online Application Release | March 2027 |
| Application Deadline | May 2027 |
| Entrance Examination / Merit Announcement | May - June 2027 |
| Counseling & Seat Allotment Rounds | June - July 2027 |
| Commencement of Classes | August 2027 |
Central Institute of Plastics Engineering and Technology Diploma in Plastics Technology Admission 2027
Central Institute of Plastics Engineering and Technology, Dehradun offers admission to its Diploma in Plastics Technology programme for the 2027 academic session. The course is conducted over a duration of 3 Years with an intake capacity of 120 Seats. Candidates seeking entry must fulfill the stream eligibility criteria and performance guidelines established by the college.
Central Institute of Plastics Engineering and Technology Diploma in Plastics Technology Eligibility Criteria
- Educational Qualification: Passed qualifying examination (10+2 for UG / Bachelor's degree for PG) in relevant discipline.
- Minimum Aggregate Marks: Secured minimum 45% aggregate marks in qualifying subject combination.
- Recognized Board / Varsity: Qualification must be awarded by a recognized board or university.
Central Institute of Plastics Engineering and Technology Diploma in Plastics Technology Selection Process
- Qualifying Merit / Entrance: Selection is based on candidate performance in qualifying examinations and accepted entrance tests (Qualifying Merit Screening).
- Merit Screening: Publication of merit lists based on academic scores and category reservation norms.
- Seat Confirmation: Document verification and fee deposit at the college admission counter.
How to Apply for Diploma in Plastics Technology at Central Institute of Plastics Engineering and Technology?
- Online Registration: Visit https://www.cipet.gov.in/centres/cipet-dehradun/introduction.php and click on the 'Diploma in Plastics Technology Admission' registration link.
- Fill Information: Complete academic marksheets, personal details, and course preference.
- Upload Certificates: Upload required certificates, photographs, and identity proof.
- Fee Payment: Submit non-refundable application fee online and print out receipt.
Central Institute of Plastics Engineering and Technology Diploma in Plastics Mould Technology Admission 2027
Central Institute of Plastics Engineering and Technology, Dehradun offers admission to its Diploma in Plastics Mould Technology programme for the 2027 academic session. The course is conducted over a duration of 3 Years with an intake capacity of 60 Seats. Candidates seeking entry must fulfill the stream eligibility criteria and performance guidelines established by the college.
Central Institute of Plastics Engineering and Technology Diploma in Plastics Mould Technology Eligibility Criteria
- Educational Qualification: Passed qualifying examination (10+2 for UG / Bachelor's degree for PG) in relevant discipline.
- Minimum Aggregate Marks: Secured minimum 45% aggregate marks in qualifying subject combination.
- Recognized Board / Varsity: Qualification must be awarded by a recognized board or university.
Central Institute of Plastics Engineering and Technology Diploma in Plastics Mould Technology Selection Process
- Qualifying Merit / Entrance: Selection is based on candidate performance in qualifying examinations and accepted entrance tests (Qualifying Merit Screening).
- Merit Screening: Publication of merit lists based on academic scores and category reservation norms.
- Seat Confirmation: Document verification and fee deposit at the college admission counter.
How to Apply for Diploma in Plastics Mould Technology at Central Institute of Plastics Engineering and Technology?
- Online Registration: Visit https://www.cipet.gov.in/centres/cipet-dehradun/introduction.php and click on the 'Diploma in Plastics Mould Technology Admission' registration link.
- Fill Information: Complete academic marksheets, personal details, and course preference.
- Upload Certificates: Upload required certificates, photographs, and identity proof.
- Fee Payment: Submit non-refundable application fee online and print out receipt.
Documents Needed for Central Institute of Plastics Engineering and Technology Admission Process
Candidates seeking admission to Central Institute of Plastics Engineering and Technology must submit the following original documents along with self-attested photocopies during counseling and verification:
- Matriculation (Class 10) mark sheet and certificate for birth date verification
- Class 12 / Higher Secondary (10+2) marksheet and passing certificate
- Relevant Diploma / ITI certificate (for Lateral Entry / Diploma applicants)
- Entrance examination scorecard or qualifying merit rank card (if applicable)
- Government-issued Photo ID proof (Aadhaar Card / Voter Card / Passport)
- Color passport-size photographs and signature copy
- Category, EWS, or PwD certificate (if claiming reservation / quota)
- Domicile / State residence certificate (if applying under home state quota)
- Transfer Certificate and Character Certificate from head of last attended institute
Step-by-Step Application Guide: How to Apply for Central Institute of Plastics Engineering and Technology
- Online Portal Access: Access the official institute website at https://www.cipet.gov.in/centres/cipet-dehradun/introduction.php and click on the 'Admission 2027' link.
- Registration: Complete initial registration using a valid email ID and phone number.
- Application Form: Fill in personal details, academic qualifications, and entrance exam roll numbers accurately.
- Document Upload: Upload scanned copies of required marksheets, passport photograph, and signature.
- Fee Payment: Pay the non-refundable application fee using net banking, credit/debit card, or UPI, and print the confirmation page for reference.
Frequently Asked Questions (FAQs) Regarding Central Institute of Plastics Engineering and Technology Admission
Q1. What is the primary selection criteria for Central Institute of Plastics Engineering and Technology admission?
Admissions evaluate candidate performance in qualifying examinations and accepted entrance tests such as qualifying merit screening.
Q2. Is there any management quota or direct admission available at Central Institute of Plastics Engineering and Technology?
Direct admissions under management/institutional quota follow guidelines issued by the university and state admissions authority.
Q3. How can prospective students submit their application for Central Institute of Plastics Engineering and Technology?
Applicants can complete and submit their online application forms through https://www.cipet.gov.in/centres/cipet-dehradun/introduction.php.