Q1121
Open questionSpark plug is provided in a/an
Select an option to see the answer and solution.
Chemical Engineering · all questionsChemical Engineering Basics
Chemical Engineering Basics
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
1,273
Questions
57/64
Page
Pick an option on a question to see the right answer and solution.
Q1122
Open questionSprings are not made of
Select an option to see the answer and solution.
Q1123
Open questionCurrent asset of a factory includes the
Select an option to see the answer and solution.
Q1124
Open questionIn the blast furnace, incorporation of water vapour in the blast gives the following effect.
Select an option to see the answer and solution.
Q1125
Open questionMaximum carbon content in cast iron is __________ percent.
Select an option to see the answer and solution.
Q1126
Open questionFor separating small pieces of metal from engine oil of a car, the best separating technique is the
Select an option to see the answer and solution.
Q1127
Open questionWhich of the following has the highest value of refractive index?
Select an option to see the answer and solution.
Q1128
Open questionA machine having assumed life of 20 years is purchased for Rs 32000/-. Its scrap value at the end of its life is Rs 8000/-. If the depreciation is calculated by diminishing balance method, then percentage reduction in its value at the end of first year is __________ percent.
Select an option to see the answer and solution.
Q1129
Open questionBrittleness induced due to the presence of sulphur in steel can be reduced by adding
Select an option to see the answer and solution.
Q1130
Open questionBrittleness induced due to the presence of sulphur in steel can be reduced by adding
Select an option to see the answer and solution.
Q1131
Open questionThe dimensional formula of bulk modulus of elasticity is same as that of the
Select an option to see the answer and solution.
Q1132
Open questionSurface finish of casting does not depend upon the
Select an option to see the answer and solution.
Q1133
Open questionThe minimum and the maximum number of members required to form a Private Limited Joint Stock Company are respectively
Select an option to see the answer and solution.
Q1134
Open questionThe elastic strain in copper is due to the
Select an option to see the answer and solution.
Q1135
Open questionThe ratio of the shear stress to the principal stress on a principal plane is
Select an option to see the answer and solution.
Q1136
Open questionIn electrical resistance welding, distortion results from the use of improper
Select an option to see the answer and solution.
Q1137
Open questionWith increase in pressure, the latent heat of steam
Select an option to see the answer and solution.
Q1138
Open questionOxide layer formed on the non-ferrous metal surface after its annealing is
Select an option to see the answer and solution.
Q1139
Open questionSolidification time of a molten metal in a casting is proportional to (where, V = volume of metal & A = its surface area; in the casting)
Select an option to see the answer and solution.
Q1140
Open questionSurface tension of a liquid
Select an option to see the answer and solution.