Q221
Open questionThis type of solid has a polygon for a base and triangular lateral faces that intersect at a vertex:
Select an option to see the answer and solution.
Mechanical Engineering · all questionsEngineering Drawing
Engineering Drawing
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
255
Questions
12/13
Page
Pick an option on a question to see the right answer and solution.
Q222
Open questionMost architectural firms and mechanical design companies utilize different categories of blocks. These sets of blocks are usually housed in _________.
Select an option to see the answer and solution.
Q223
Open questionIn an oblique drawing, equally spaced partial circles may be used to show this:
Select an option to see the answer and solution.
Q224
Open questionThis line pattern is composed of three dashes, one long dash on each end with a short dash in the middle:
Select an option to see the answer and solution.
Q225
Open questionWhen using the descriptive geometry method to create an auxiliary view the drafter should _________.
Select an option to see the answer and solution.
Q226
Open questionThis type of thread is a thread on the inside of a member:
Select an option to see the answer and solution.
Q227
Open questionThe Offset tool should only be used for placing _________ in an isometric drawing.
Select an option to see the answer and solution.
Q228
Open questionIn a CAD system, you can draw an ellipse by specifying these:
Select an option to see the answer and solution.
Q229
Open questionGeometric primitives include shapes such as ________.
Select an option to see the answer and solution.
Q230
Open questionMost architectural drawings produced for field use by building contractors are printed on architectural "D" size paper which measures __________.
Select an option to see the answer and solution.
Q231
Open questionThis is a line terminated by arrowheads, indicating the direction and extent of a dimension:
Select an option to see the answer and solution.
Q232
Open questionThis type of weld is the most common in structural steel fabrication:
Select an option to see the answer and solution.
Q233
Open questionAcceptable parts must not extend beyond this:
Select an option to see the answer and solution.
Q234
Open questionIn multi-view drawing it is common practice to include three views, the front, the top and the right side. If no dimensions are required on the right side view the drafter can ________.
Select an option to see the answer and solution.
Q235
Open questionCenter lines are used to locate or represent the centers of ________.
Select an option to see the answer and solution.
Q236
Open questionIn order to create an isometric circle to represent a hole through the top surface of a box, the drafter must insure that the correct iso-plane has been selected by scrolling through the iso-planes using the ________ key.
Select an option to see the answer and solution.
Q237
Open questionApproximately this much of the cost of product development and manufacture is determined at the design stage:
Select an option to see the answer and solution.
Q238
Open questionIf a plane is parallel to the plane of projection, it appears:
Select an option to see the answer and solution.
Q239
Open questionAn accurate record of changes made to release drawings is tracked via this:
Select an option to see the answer and solution.
Q240
Open questionThe site plan illustrates _________.
Select an option to see the answer and solution.