Q281
Open questionThe buckling load for a given column depends upon
Select an option to see the answer and solution.
Mechanical Engineering · all questionsStrength Of Materials
Strength Of Materials
practice.
Practice every MCQ with options. Use Show answers when you want the correct option and solution.
445
Questions
15/23
Page
Pick an option on a question to see the right answer and solution.
Q282
Open questionA load which is spread over a beam in such a manner that it varies uniformly over the whole length of abeam is called uniformly ________ load.
Select an option to see the answer and solution.
Q283
Open questionA continuous beam is one which is
Select an option to see the answer and solution.
Q284
Open questionA cantilever beam is one which is
Select an option to see the answer and solution.
Q285
Open questionA body is subjected to two normal stresses 20 kN/m2 (tensile) and 10 kN/m2 (compressive) acting perpendicular to each other. The maximum shear stress is
Select an option to see the answer and solution.
Q286
Open questionWhen a body is subjected to biaxial stress i.e. direct stresses () and () in two mutually perpendicular planes accompanied by a simple shear stress ( ), then maximum shear stress is
Select an option to see the answer and solution.
Q287
Open questionWhen a body is subjected to a direct tensile stress () in one plane accompanied by a simple shear stress ( ), the maximum shear stress is
Select an option to see the answer and solution.
Q288
Open questionTwo bars of different materials and same size are subjected to the same tensile force. If the bars have unit elongation in the ratio of 2 : 5, then the ratio of modulus of elasticity of the two materials will be
Select an option to see the answer and solution.
Q289
Open questionWhenever some external system of forces acts on a body, it undergoes some deformation. As the body undergoes some deformation, it sets up some resistance to the deformation. This resistance per unit area to deformation, is called
Select an option to see the answer and solution.
Q290
Open questionElasticity of Mild Steel specimen is defined by
Select an option to see the answer and solution.
Q291
Open questionThe energy absorbed in a body, when it is strained within the elastic limits, is known as
Select an option to see the answer and solution.
Q292
Open questionThe assumption made in Euler's column theory is that
Select an option to see the answer and solution.
Q293
Open questionThe rectangular beam 'A ' has length l, width b and depth d. Another beam 'B' has the same width and depth but length is double that of 'A'. The elastic strength of beam 'B' will be __________ as compared to beam A.
Select an option to see the answer and solution.
Q294
Open questionThe rectangular beam 'A' has length l, width b and depth d. Another beam 'B' has the same length and width but depth is double that of 'A'. The elastic strength of beam B will be __________ as compared to beam A.
Select an option to see the answer and solution.
Q295
Open questionThe ultimate tensile stress for mild steel is __________ the ultimate compressive stress.
Select an option to see the answer and solution.
Q296
Open questionIn a simple bending theory, one of the assumptions is that the plane sections before bending remain plane after bending. This assumption means that
Select an option to see the answer and solution.
Q297
Open questionThe simply supported beam 'A' of length '' carries a central point load 'W'. Another beam 'B' is loaded with a uniformly distributed load such that the total load on the beam is 'W'. The ratio of maximum deflections between beams 'A' and 'B' is
Select an option to see the answer and solution.
Q298
Open questionFor a simply supported beam of length 'L', when a concentrated load W is applied in the center of the beam, the maximum deflection is
Select an option to see the answer and solution.
Q299
Open questionThe stress at which the extension of the material takes place more quickly as compared to the increase in load, is called
Select an option to see the answer and solution.
Q300
Open questionIf the depth is kept constant for a beam of uniform strength, then its width will vary in proportional to
Select an option to see the answer and solution.