The Voltage across the last resistor is V. All resistors are unity. Then Vs is given by
Select an option to see the answer and solution.
The colour band on the extreme left in general purpose fixed resistors represents:
A. Tolerance
B. First significant digit
C. Wattage Rating
D. Voltage Rating
Select an option to see the answer and solution.
Two inductively coupled coils have self inductance L1 = 50 mH, L2 = 200 mH. Find the value of maximum possible mutual inductance if the coefficient of coupling is 0.5.
A. 50 mH
B. 100 mH
C. 125 mH
D. 150 mH
Select an option to see the answer and solution.
The circuit shown in the Figure, is to be scaled to an impedance level of 5 kΩ and a resonant frequency of 5 M rad/s. Which one of the following is a correct set element values for the scaled circuit?
A. 2.5 Ω, 0.2 mH, 200 pF
B. 5 kΩ, 0.2 mH, 200 pF
C. 5 kΩ, 0.2 mH, 200 µF
D. 5 kΩ, 0.1 mH, 0.4 µF
Select an option to see the answer and solution.
The common voltage across parallel branches with different voltage sources can be determined by
A. Superposition theorem
B. Thevenin's theorem
C. Norton's theorem
D. Millman's theorem
Select an option to see the answer and solution.
Six light bulbs are connected in parallel across 110 volt. Each bulb is 75 Watt. The current flows through each bulb is
A. 0.682 A
B. 0.482 A
C. 0.382 A
D. 0.282 A
Select an option to see the answer and solution.
For a 3-pF capacitor with 20 V across it, the energy stored will be:
A. 60 J
B. 600 pJ
C. 60 pJ
D. 6 J
Select an option to see the answer and solution.
Two similar mutually coupled coils have a total inductance of 900 mH co-efficient of coupling is 0.5. The self inductance of each coil is
A. 300 mH
B. 150 mH
C. 75 mH
D. 50 mH
Select an option to see the answer and solution.
Obtain potential of node B with respect to node G in the network shown in the figure.
A. 63 64 V
B. 1 V
C. 64 63 V
D. 63 32 V
Select an option to see the answer and solution.
The response of the LTI (Linear Time Invariant) system:
For input x(t) = δ(t) is:
A. 4 1 e − t /4 u ( t )
B. 4 1 e − 4 t u ( t )
C. 2 1 e − 1/2 t u ( t )
D. 2 1 e − 2 t u ( t )
Select an option to see the answer and solution.
The number of tree branches for a network with the graph shown in figure.
A. depends on the choice of tree
B. is less than 8
C. is exactly 8
D. is exactly 9
Select an option to see the answer and solution.
The time constant for given circuit will be
Select an option to see the answer and solution.
In an electrical circuit, fuse is blown and the circuit is cut-off due to-
A. Low voltage
B. Excessive current
C. High inductance
D. Excessive voltage
Select an option to see the answer and solution.
Which one of the following statements is not correct?
A. A tree contains all the vertices of its graph
B. A circuit contains all the vertices of its graph
C. The number of f-circuits is the same as the number of chords
D. There are at least two edges in a circuit
Select an option to see the answer and solution.
In the circuit shown, what value of R
L maximizes the power delivered to R
L ?
Select an option to see the answer and solution.
A terminal where three or more branches meet is known as
A. node
B. terminus
C. combination
D. anode
Select an option to see the answer and solution.
The input impedance of the circuit shown in the figure, if the respective coil impedance Z
1 = (5 + j8) Ω and Z
2 = (3 + j8) Ω is
A. (8 + 16j) Ω
B. (2 + j0) Ω
C. (15 + 64j) Ω
D. (8 + 0j) Ω
Select an option to see the answer and solution.
Which of the following statement is correct:
A. The flow of current in the electric circuit involves discontinuous expenditure of energy
B. The flow of current in the electric circuit requires energy for creating the current but not to maintain it
C. In the magnetic circuit energy is needed continuously to maintain the flux
D. In the magnetic circuit energy is needed for creating the flux initially but not maintain it
Select an option to see the answer and solution.
The impedance of a series RLC circuit is
Select an option to see the answer and solution.
The ABCD parameters of the following 2-port network are
A. \left[ {\begin{array}{*{20}{c}}
{3.5 + j2}&{20.5} \\
{20.5}&{3.5 - j2}
\end{array}} \right]
B. \left[ {\begin{array}{*{20}{c}}
{3.5 + j2}&{30.5} \\
{0.5}&{3.5 - j2}
\end{array}} \right]
C. \left[ {\begin{array}{*{20}{c}}
{10}&{2 + j0} \\
{2 + j0}&{10}
\end{array}} \right]
D. \left[ {\begin{array}{*{20}{c}}
{7 + j4}&{0.5} \\
{30.5}&{7 - j4}
\end{array}} \right]
Select an option to see the answer and solution.